Is firmware 3.1.1 reliable?

fcwilt

Hi,

I was thinking of upgrading one of my printers from 2.x.x to 3.1.1 (following the required steps) and get up to speed on the various changes.

For those that are using 3.1.1 are you finding it to be trouble free?

Thanks.

Frederick

Phaedrux

From my view of the support issues coming in, 3.1.1 is far improved and would be ready for normal use.

fcwilt

@Phaedrux said in Is firmware 3.1.1 reliable?:

From my view of the support issues coming in, 3.1.1 is far improved and would be ready for normal use.

Your opinion is good enough for me.

Off I go to upgrade...

Frederick

dc42

I am not aware of any bugs in 3.1.1 that are not either also in 2.05.1 or only affect features new to v3 e.g. conditional GCode.

Phaedrux

@fcwilt said in Is firmware 3.1.1 reliable?:

Off I go to upgrade...

I would also recommend getting a config from the web tool to compare against. It helps alot to have all the correct syntax in place from the get go rather than try to manually convert everything.

fcwilt

@dc42 Thanks for the info.

Frederick

fcwilt

@Phaedrux said in Is firmware 3.1.1 reliable?:

I would also recommend getting a config from the web tool to compare against. It helps alot to have all the correct syntax in place from the get go rather than try to manually convert everything.

Already did that but it was just to see how the web tool worked.

I need to go back and enter the actual values for the printer in question.

But I'm starting to see how things go together.

The firmware update went fine and now 3.1.1 is up and running.

Frederick

Thalios

I ain't a reference, but i'm using 3.1.1 on my 3x Duet 3 6HC boards and it has been flawless.

(Railcore II 300ZL, Tronxy X5SA-500 Pro, Ender 3 Pro)

fcwilt

@Thalios said in Is firmware 3.1.1 reliable?:

I ain't a reference, but i'm using 3.1.1 on my 3x Duet 3 6HC boards and it has been flawless.

(Railcore II 300ZL, Tronxy X5SA-500 Pro, Ender 3 Pro)

Thank you.

Frederick