Unsolved Question about manual stepper control
-
Hi,
On a printer with 3 Z axis steppers setup for auto-leveling is there a way (for testing purposes) to command each stepper to move independently?
Thanks.
Frederick
-
You'd have to map them to individual axis, move them and then map them back to all be the z axis.
-
This would be similar to how independent Z axis leveling was handled in RRF2 with multiple endstops. Each motor would have its own axis and could be commanded as such.
https://duet3d.dozuki.com/Guide/Independent+Z+motors+and+endstop+switches+in+RRF2/18
You could create a macro that splits the motors up and another that rejoins them.
-
-
Thanks.