paneldue 3.2 screen not refreshing after macro is run

apak

I have a macro to preheat bed and nozzle to a desire temp.

With previous fw, I just run it, and the screen info updated while heating.
https://vimeo.com/471673926

but with paneldue 3.2, it just does not update screen info until macro is finished.
https://vimeo.com/471673915

FW 3.2Beta2
DWC 3.2Beta2
Wifiserver 1.24b
paneldue 3.2

macro

M104 S150 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S150 ; wait for extruder temp

wilriker

@apak This is a known issue with RepRapFirmware 3.2-beta2 and will be fixed in 3.2-beta3.