new duet 2 wifi not reading sd card
-
I have a Duet 2 Wifi that I finally was able to update the firmware but I couldn't use the web page and come to find out (using the M122 command) that the SD 0 was connected but only reading at 0.2 MBs So it looks like it isn't actually reading the SD card. I tried 6 different micro SD cards of varying capacities, all formated to FAT32, and none of them worked.
please help. -
@knightwolf313 said in new duet 2 wifi not reading sd card:
but I couldn't use the web page
whats the error?
-
Can you post the results of M122?
Can you post a photo of the back of the SD card slot showing the solder tabs clearly?
When and where did you purchase your board?
-
@Veti it says that the duet rejected the http request: page not found. It then says to check that the ad card is mounted and has the correct files in the /www folder.
-
@Phaedrux ![alt text]
(image url)Sorry I thought I got a pic of the M122 but it didn't take. though today it said the sd card was reading at 30MBs as opposed to 0.2MBs as it did hte other day.
I bought the card through Filastruder on April 16th. I know I held off using it for a while, but I needed to wait till I had all the components and the display took forever to get here. (then I had to move last month and it took awhile to get everything ready after the move.)
-
@knightwolf313 said in new duet 2 wifi not reading sd card:
it says that the duet rejected the http request: page not found. It then says to check that the ad card is mounted and has the correct files in the /www folder.
check on your computer whats the content of the www folder on the sd card.
-
-
@knightwolf313 said in new duet 2 wifi not reading sd card:
Sorry I thought I got a pic of the M122
better to copy/paste the text if possible.
now that you've confirmed the computer sees the files, try
M20 S2 P"/www"to see if the duet sees the same, but odds are it won't otherwise it'd just-work(tm). -
Yes please show the results of
M122andM20 S2 P"/www"If it's unable to read the /www folder then the web interface won't work and you can't upload gcode files, so that's no good.
If you have confirmed the same results with a few different cards and it's (intermittently?) showing the read speeds as 0.2MB/s then there is likely an issue with the SD card slot and we will do a warranty exchange. In which case, contact Filastruder and initiate a warranty claim. Include a link to this thread as authorization.
-
And I have tried with 6 different SD cards with no luck reading any of them.
-
@knightwolf313 said in new duet 2 wifi not reading sd card:
I bought the card through Filastruder on April 16th.
Thanks for all the testing. Please contact Filastruder and initiate a warranty exchange. Please include a link to this thread as authorization.
-
@Phaedrux Thanks for the help and working with me on this.
-
undefined DavidLeigh referenced this topic
