Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Help me get connected to my Duet2Wifi

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    6
    126
    6.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Kwad3dundefined
      Kwad3d @Phaedrux
      last edited by

      @Phaedrux Sorry if I was not clear but Im not getting anywhere at all. I put a new config on a SD card and put it into the board and power it on. Since I can't connect to my wifi or have a duet screen I can not send any G code. I don't even know if the board is accepting the new config from the SD card for that matter. Because my router is showing the board on the wrong IP address I can only assume the new config is not being accepted by the board. Some customer support from Duet3D would be great but they just direct me to this forum instead. When I compiled the config the first time I didn't have to edit any other files to connect to my wifi so Im confused on why I would have to do that now. My only guess is to erase the board and see If that will get me further.

      Phaedruxundefined 1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator @Kwad3d
        last edited by Phaedrux

        @Kwad3d said in Config not updating:

        Some customer support from Duet3D would be great but they just direct me to this forum instead.

        Hi, I'm your customer support. This is it.

        If the board shows up on the router can you ping that IP address to confirm it's actually there?

        When you go to that IP address in a browser you said you get "Your Duet rejected the HTTP request: overflow", which as Bearer said usually means the web interface files are missing on the SD card. He then showed you how to get the files and check.

        If you put the SD card into your PC, what is the folder structure? Does it match this: https://duet3d.dozuki.com/Wiki/SD_Card#Section_Creating_the_file_structure

        If you can't connect to the web interface and you don't have a Paneldue to send gcode commands you will need to connect a USB cable and use a USB terminal to send commands. Since this seems to be the case, your next steps would be the same as if the duet was brand new and never connected to the network.

        https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7

        Z-Bot CoreXY Build | Thingiverse Profile

        Kwad3dundefined 1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator @Kwad3d
          last edited by

          @Kwad3d said in Config not updating:

          After a power outage one day I could never get it to connect again on that printer and never got any help re-establishing that connection.

          If you mean this other thread of yours: https://forum.duet3d.com/topic/18336/how-do-i-reconnect-to-the-duet-wifi?_=1605495719158

          You never replied to it.

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • Kwad3dundefined
            Kwad3d @Phaedrux
            last edited by

            @Phaedrux you need to be more specific please. Your asked me to "ping" the board. Forgive me for sounding dumb but is Ping a program or something? I know it is not so please be more specific on how your asking me to communicate with the board. I connected the board directly with a USB cable. it shows up under ports in the Device manager.

            Phaedruxundefined 1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              Ok no problem. At any point you don't know what I'm talking about just ask and I'll explain in more detail. That's how you learn.

              Ping is a networking term (and command) that basically sends a packet of information to an IP address and waits for a response. We'll use this to see if the IP address that the router shows the duet is using is actually being used by the duet.

              If you're on windows press windows key + R to open the run dialogue, then type cmd and press enter. That will open up a command prompt terminal. From there, type ping followed by the IP address the router thinks the duet is using. Make sure the Duet is powered on.

              let me know what it says in reply. If it works then we know the duet is connected to the network and you should be able to access the web interface IF the web interface files are present on the SD card.

              If it doesn't work, then we'd need to go through the getting connected steps.

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator @Kwad3d
                last edited by

                @Kwad3d said in Config not updating:

                I connected the board directly with a USB cable. it shows up under ports in the Device manager.

                If we can't get to the Duet by the network then you'll use the usb connection with a terminal program called YAT. It's detailed here. Rather than me retype it, you can read it here. It even has pictures. https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7

                Z-Bot CoreXY Build | Thingiverse Profile

                Kwad3dundefined 1 Reply Last reply Reply Quote 0
                • Kwad3dundefined
                  Kwad3d @Phaedrux
                  last edited by

                  @Phaedrux Ok thanks. I will attempt to "ping" the board and I will Intall YAT as well while I'm at it in case I have to go that route

                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    Having YAT installed is a good idea regardless in case you ever need to communicate with the board in the future. It's a handy fall back for cases just like this.

                    Z-Bot CoreXY Build | Thingiverse Profile

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      I'm going to sleep, but regardless of how the ping goes, going through the getting connected guide should get your duet at least connected to the wifi network. From there it's just a matter of having the web interface files on the SD card. All the links provided in this thread should get you there. If you get stuck, ask for clarification and someone will likely be able to answer you in short order. Remember, you catch more flies with honey than vinegar. If you get stuck and no one comes to help, I'll be back tomorrow. Eventually we will get you sorted out, it'll just take some time and effort.

                      Z-Bot CoreXY Build | Thingiverse Profile

                      Kwad3dundefined 1 Reply Last reply Reply Quote 0
                      • Kwad3dundefined
                        Kwad3d @Phaedrux
                        last edited by

                        @Phaedrux Good Morning. So I used YAT to connect to the board and verified the firmware being used. I also used M552 it says the modal is connected to my network. I disabled the modal and re entered my network information and turned it back on but still not connection to my wifi. I also went through my folder structure and confirmed all the files are there. I went through the documentations but Im not sure what to do next

                        1 Reply Last reply Reply Quote 0
                        • Kwad3dundefined
                          Kwad3d @A Former User
                          last edited by Kwad3d

                          @bearer There is no Index.htm.gz file on the card nor is it listed in the SD folder structure. I also downloaded the SD contents Zip and no such file is there either. I don't see any documentation about creating such a file so not sure where this file is supposed to come from the config tool or if Im supposed to write it myself there is not source material for me to do so.

                          A Former User? 1 Reply Last reply Reply Quote 0
                          • Phaedruxundefined
                            Phaedrux Moderator
                            last edited by

                            When you send M552 in YAT, did it reply with what IP address it's connected to?

                            That would be the address to connect to in the browser.

                            Can you also send M115 in the console to get the installed firmware version? We'll need to know that to ensure we're using the right DWC files.

                            Z-Bot CoreXY Build | Thingiverse Profile

                            Kwad3dundefined 1 Reply Last reply Reply Quote 0
                            • A Former User?
                              A Former User @Kwad3d
                              last edited by

                              @Kwad3d said in Help me get connected to my Duet2Wifi:

                              I don't see any documentation about creating such a file so not sure where this file is supposed to come from

                              @bearer said in Help me get connected to my Duet2Wifi:

                              see https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Updating_WiFi_firmware_or_DuetWebControl_files

                              which says

                              If your Duet 2 WiFi is running main firmware 1.19 or later:

                              • Upload the new DuetWebControl.zip file through the General tab on the Settings page of DuetWebControl.
                              • If the web interface is not working, then move the SD card to a PC, delete or rename any existing /www folder, create a new one, and extract the contents of DuetWebControl.zip into it. Do not unzip the individual .gz files, leave them as they are on the SD card.

                              You'll find the zip file on the duet github , the config tool offers to download the latest version, and its bundled inside the reprapfirmware releases like 3.1.1

                              Kwad3dundefined 1 Reply Last reply Reply Quote 0
                              • Kwad3dundefined
                                Kwad3d @Phaedrux
                                last edited by

                                @Phaedrux Yes M552 comes back saying "WiFi module is connected to access point NETGEAR19, IP address 192.168.1.10<LF>ok<LF>" but when I go to that Ip address I get this message "Your Duet rejected the HTTP request: overflow".

                                M115 comes back with "FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-06-13b2<LF>ok<LF>"

                                1 Reply Last reply Reply Quote 0
                                • Kwad3dundefined
                                  Kwad3d @A Former User
                                  last edited by Kwad3d

                                  @bearer So being that firmware 1.19 and earlier are not supported anymore shouldn't the SD continents be updated? I don't even think boards are shipped with firmware that far back are they? I confirmed the config on the board was never updated so why would I need to alter any files on the SD when It worked fine before?

                                  1 Reply Last reply Reply Quote 0
                                  • Phaedruxundefined
                                    Phaedrux Moderator
                                    last edited by

                                    Ok, so next step will be to try replacing your web interface files on the SD card. So pull the SD card and put it in your PC.

                                    There should be a WWW folder in the root. Delete the contents of the WWW folder.

                                    Download this zip file and extract it into the /www folder.

                                    https://github.com/Duet3D/RepRapFirmware/releases/download/2.03/DuetWebControl-1.22.6.zip

                                    Inside of the www folder there should now be a CSS, JS, and FONTS folder and a few other files.

                                    This version matches your installed firmware version 2.03.

                                    Then put the SD card back in the duet, power it up, and try hitting the IP address in your browser again.

                                    Z-Bot CoreXY Build | Thingiverse Profile

                                    Kwad3dundefined 1 Reply Last reply Reply Quote 0
                                    • Kwad3dundefined
                                      Kwad3d @Phaedrux
                                      last edited by

                                      @Phaedrux Success. I have re-established a connection to the board. I have swapped to board to a new machine that will be using a BLtouch. I have a V3.1 and in the config tool is says to use 3.3v or risk damage to the board. but the documentation shows it connected to a 5v power source. Which is the correct power for my version of the BLtouch?

                                      1 Reply Last reply Reply Quote 0
                                      • Phaedruxundefined
                                        Phaedrux Moderator
                                        last edited by

                                        Congratulations.

                                        First thing, it's time to update your firmware.

                                        When connected to the web interface go to the system tab and upload this zip file. Don't extract it or anything first, just upload the zip file. It should detect it and take care of updating things.

                                        https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip

                                        Then after it reboots, use M115 from the DWC gcode console to check that firmware is now 2.05.1

                                        If you're going to be setting up a new machine, now is probably a good time to also update to RRF3 and getting a fresh config for the printer. If you tell me what kind of printer it is and some details about it, I can produce a config file set to use. That would make the BLtouch setup moot since it would contain all those files as well.

                                        As for connecting the BLtouch, the new BLtouch since v2 and the new duetwifi will all work fine with 3.3 or 5v, so you don't have to do anything anymore.

                                        Z-Bot CoreXY Build | Thingiverse Profile

                                        Kwad3dundefined 1 Reply Last reply Reply Quote 0
                                        • Kwad3dundefined
                                          Kwad3d @Phaedrux
                                          last edited by

                                          @Phaedrux Forgive me its been a while since I have seen the interface. Im not finding a system tab... I do see a settings tab that has a "upload file(s)" option

                                          1 Reply Last reply Reply Quote 0
                                          • Phaedruxundefined
                                            Phaedrux Moderator
                                            last edited by

                                            Ah, forgive me. I forgot how old of a web interface version you're on.

                                            It's the settings tab on the left, and then there is a big blue button saying upload files.

                                            If it doesn't update properly by uploading the zip file we can use a modified method. But hopefully that works because it's definitely the easy way to update.

                                            Z-Bot CoreXY Build | Thingiverse Profile

                                            Kwad3dundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA