Move command not executed from PanelDue + Pendant

FelixH

Hi all,

I have a PanelDue with a CNC Pendant on my Duet driven Workbee. I have a macro to rapidly move to the current WCS origin. It is as simple as this

G28 Z

G1 X0 Y0

The macro is not executed from the PanelDue, but if I send the G1 command from the web interface is no problem.

Any idea on what the problem could be?

Phaedrux

Firmware versions?

FelixH

So sorry, I missed that.

RRF2 and PanelDue 2.4, I think

Veti

PanelDue 2.4

there is no paneldue 2.4 version.

Phaedrux

1.24 maybe?

FelixH

1.24 maybe?

yes, certanly. I was talking on the top of my head earlier. I knew there was a 2 and a 4 somewhere...

Phaedrux

And firmware version on the Duet?

FelixH

And firmware version on the Duet?

RRF2, this one I got it right, I'm sure...