why my web status always starting ?
-
More detail please.
Where are you seeing "starting" ?
Can you confirm your firmware version with M122?
Have you updated the DWC as well?
If this is with a PanelDue can you confirm you have up to date firmware there as well?
-
@Phaedrux
M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.2-beta4.1 running on Duet 3 MB6HC v0.6 or 1.0 (SBC mode)
Board ID: 08DJM-956BA-NA3TN-6J9D6-3S86M-TVB6T
Used output buffers: 1 of 40 (13 max)I have update my duet pi to beta, and i dont have panedue.
-
post your config files
-
This post is deleted! -
Send M98 P"config.g" and report the results
-
@Phaedrux
Fail ,because always wite and nothing report
-
I can see what you mean mabe. I'll check the config line by line
-
Did it work with firmware 3.1.1 and DWC 3.1.1?
Are you using a raspberry pi as well?
Can you connect via USB and try M122 and the M98 command? -
@Phaedrux
yes ,it work with 3.1.1,
yes,im using a raspberry pi(duet pi)
And i will try usb,but it may take time -
@Phaedrux Found the reason,if i del m501,everything normal,because i dont have configoverride at sys/.
-
@Phaedrux
Thanks every much,m98 p"config" give me inspire.
