Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Print stops!! Maestro 3.1.1

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    4
    8
    391
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • cabal2000undefined
      cabal2000
      last edited by

      Morning peeps.

      I have had this issue for a few weeks now, my Maestro 3.1.1 stops part way threw a print. Is there a log file that I can look at to see there are errors? I checked in the "Console" but no errors are showing in there. It seems to be with larger print files. I'm using Simplify3D as my slicer, never had issues with it before. Yesterday I changed the MicroSD card, formatted and copied the files over and it still happened. Checked all the cables to make sure nothing was loose. Any ideas?

      1 Reply Last reply Reply Quote 0
      • cabal2000undefined
        cabal2000
        last edited by

        Supply voltage: min 0.0, current 12.2, max 12.3, under voltage events: 0, over voltage events: 0, power good: yes
        Driver 0: position 0, standstill, read errors 0, write errors 1, ifcnt 67, reads 58841, writes 6, timeouts 0, DMA errors 0
        Driver 1: position 0, standstill, read errors 0, write errors 1, ifcnt 67, reads 58841, writes 6, timeouts 0, DMA errors 0
        Driver 2: position 0, standstill, read errors 0, write errors 1, ifcnt 67, reads 58841, writes 6, timeouts 0, DMA errors 0
        Driver 3: position 0, standstill, read errors 0, write errors 1, ifcnt 69, reads 58841, writes 6, timeouts 0, DMA errors 0
        Driver 4: position 0, standstill, read errors 0, write errors 1, ifcnt 62, reads 58841, writes 6, timeouts 0, DMA errors 0

        Write errors1??? What does this mean in english?!

        A Former User? 1 Reply Last reply Reply Quote 0
        • A Former User?
          A Former User @cabal2000
          last edited by

          @cabal2000 said in Print stops!! Maestro 3.1.1:

          Write errors1??? What does this mean in english?!

          presumably that the board is having trouble writing to the smart stepper drivers; not sure what would cause that but any debris on the board?

          1 Reply Last reply Reply Quote 0
          • cabal2000undefined
            cabal2000
            last edited by

            Not that I can see. And I have been watching the board temp, its doesn't go above 35-40c, and i do have fans directed to the steppers.

            1 Reply Last reply Reply Quote 0
            • cabal2000undefined
              cabal2000
              last edited by

              I'm going to reinstall everything to factory setting later today. Format the card and do a fresh install.

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                Please provide the results of M122 after the freeze if possible.

                Z-Bot CoreXY Build | Thingiverse Profile

                cabal2000undefined 1 Reply Last reply Reply Quote 0
                • cabal2000undefined
                  cabal2000 @Phaedrux
                  last edited by

                  @Phaedrux can do!!

                  1 Reply Last reply Reply Quote 0
                  • dc42undefined
                    dc42 administrators
                    last edited by dc42

                    It's normal to get a single write error to each driver during initialization.

                    If the print stops again, run M122 immediately and post the result here.

                    Duet WiFi hardware designer and firmware engineer
                    Please do not ask me for Duet support via PM or email, use the forum
                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                    1 Reply Last reply Reply Quote 0
                    • First post
                      Last post
                    Unless otherwise noted, all forum content is licensed under CC-BY-SA