Slic3r support

robm

Yayyyy! Looks like I get my 'Send to printer' button back

'Octoprint settings functionality expanded to allow upload to RepRapFirmware on a Duet controller."

https://github.com/alexrj/Slic3r/commit/1c74067da09a9a23ce66227b55146af6182d747d

0

Octoprint settings functionality expanded to allow upload to RepRapFi… (#4028)

* Octoprint settings functionality expanded to allow upload to RepRapFirmware on a Duet controller.

* octoprint_host renamed to print_host to enhance code readability.

Fixes #4022

cbusillo

Great, now I have to try Slic3r again after just getting S3d to output to Duet. Thanks!!!!

T3P3Tony

Oh good news!

emaker

Hello,
This new functionality was developed and tested on a Duet 0.6 running 1.18-b2 (ch fork). It should work with all recent versions of Duet/RepRapFirmware.

npm1

hiya, how would i use octoprint on a raspberry pi instead of the the duetwifi web interface, when attempted to use it the, it worked well but i couldn't send any files to the printer, would i need to remove the duetwifi password

pcsentinel

How do you use this with the Duet wifi?

dc42

@npm1:

hiya, how would i use octoprint on a raspberry pi instead of the the duetwifi web interface, when attempted to use it the, it worked well but i couldn't send any files to the printer, would i need to remove the duetwifi password

I don't know why it doesn't just work, It may be that Octoprint is expecting some Marlin-specific response that RRF doesn't emulate perfectly. I read that someone modified Octoprint so you can configure it not to wait for OK after each command, but I don't know whether that has made it into the mainstream release yet.