[RRF3.2] M207 T-parameter ignored?

[o_lampe]

Hi folks,
My retraction settings look like that

;	Retraction
M207 T0 S0.4 R0.05 F3600 T2400 Z0.2

where the T-parameter should specify a slower unretract speed.

But the answer in DWC console ignores the T-parameter.
Is it a bug in DWC?

[User3D]

In RRF 3.01 and later, if a P parameter is provided then only the retraction parameters for the specified tool will be set. says : https://duet3d.dozuki.com/Wiki/Gcode#Section_M207_Set_retract_length

[o_lampe]

@User3D
thanks for noticing my typo
Will try again with P0

[engikeneer]

@o_lampe you have two T parameters in your command. I think the first one should be P0 to apply the settings to Tool 0?

[o_lampe]

Yup, the P0 solved it!

[User3D]

@o_lampe : )