Duet 3 HC6 one final try before i give up.
-
First thing that stands out, you’re missing the declaration of the kinematic style at the top. are you running a Cartesian, xy, or delta? The machine has no idea what to do. You need a M669 command
-
Allso is it possible to update 3.1.1 to 3.2 from webcontroll?
Since the update via usb takes around 4 hours to get the board out of its hideyhole and dont have a laptop to avoid ground loops. -
@Snippy said in Duet 3 HC6 one final try before i give up.:
Allso is it possible to update 3.1.1 to 3.2 from webcontroll?
yes
see
https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Usual_procedurebut since you did the update to 3.1.1 not via web interface you might be missing the 3.0 files.
-
@Nuramori Never had any print quality issues, if it desides to load the gcode.
Its a cartesian system.
-
@Veti
O lord have mercy. -
Hi,
Sorry to hear you are having problems.
Could you provide me with brief list of the things that are not working for you?
I have a MBH6C board on my workbench at the moment and it is working fine. It's very likely I can get yours working for you as well.
I have printers running both 3.1.1 and 3.2.
Frederick
-
@Snippy I just copi/pasted from the reprap gcode page, about how to use m552
-
WOW... the webcontroll update from 3.1.1 to 3.2 worked without a sacrifice.
-
@Snippy said in Duet 3 HC6 one final try before i give up.:
WOW... the webcontroll update from 3.1.1 to 3.2 worked without a sacrifice.
Just so you know 3.2 has issues of it's own that occur in certain configurations that are somewhat uncommon.
Frederick
-
@fcwilt was not supriced
-
Well the update seems to have increased the upload speed significantly.
-
allso now my independent twin print cooling systems seems to work.
