M501 not loading config override after boot

fcwilt

Hi,

As I said config.g is ALWAYS loaded.

You can chose to load config-override.g, in addition to config.g, by putting M501 at the end of config.g.

Frederick

paboman

I have M501 at the end of config.g this is why I am expecting to see config-override.g loaded on startup.

Unfortunatelly config-override.g is not loading automatically on startup, trying to understand what I am doing wrong.

@dc42 can you help me please ?

alankilian

Try:

M98 P"config.g"

and:

M98 P"config-override.g"

Also, can you post your config files?

how do you know config-override.g is not getting executed?

Veti

execute M98 P"config.g"

you might have errors in your config

paboman

This post is deleted!

paboman

This post is deleted!

paboman

This post is deleted!

paboman

ERRATA CORRIGE

config-override.g is loaded on startup as expected but not the printer name.

I was expecting to see also the machine name M550 changing but this command is not saved by M500.

any workaround ?

Veti

duet is not marlin.

any changes you are making should be done in config.g
these you tend to do once when you set up the printer and not change afterward.

the parameters that are saved with m500 are calibration and pid values which you tend to do a bit more often.

you will realize that duet allows to to change way more parameter whereas in marlin you would have to recompile the firmware.

i for one dont use the overwrite at all an put everything in the config.g

jay_s_uk