Duet 3 Mini 5+ connections problems

T3P3Tony

when you plug the board in with the USB cable to a PC, try double clicking the reset button. you will see the diag light change to slow pulsing. The board should show up as a storage device. this will show if the USB cable/port is working or not.

dk_tommyt

hi.
Nothing happens when i press the reset button ?
tried 4 cables and 3 usb ports

greetings
tommy

chrishamm

@dk_tommyt You must press it twice in short succession, then the diag LED will start pulsing.

dk_tommyt

hi.
Nothing happens when i double clicking the reset button
i have presst it twice meany times and nothing happens

grettings
tommy

Phaedrux

Can you go through this?
https://duet3d.dozuki.com/Wiki/What_to_do_if_your_Duet_won't_respond

What LEDs light up on the board when connected to USB?

T3P3Tony

@dk_tommyt is the diag light on at all when powered over USB?

dk_tommyt

Hi.
i got a video of what happens on power on and when i press the reset button

https://youtu.be/YOGZNTowwMc

grettings
tommy

Phaedrux

Can you try with the SD card removed?

It was hard to see in the video which LEDs exactly are lit.

dk_tommyt

@Phaedrux
https://youtu.be/k5vH9-jUoQ0

it is the same whiteout sdcard.
it is 3v and 5v

Phaedrux

Please contact your vendor and initiate a warranty exchange. Include a link to this thread as authorization.

dk_tommyt

hi.
will do.
thanks for the help.
grettings

tommy