Duet3D PCB delta printer effector sneak preview
-
Sweet is there any preorder going on??
-
Please count me in, now that I am back to Haydn's rods instead of tricklaser rods I am very interested, too….
-
Wow…I've just now noticed this topic. What a stunning design, I really love the concept!
Also, if you haven't already is there any chance you could work with the Zesty Nimble crew so they can design a mount for this new heatsink/effector arrangement?
Cheers!
Has already been done as long as the Hole system on the production Hot-ends don't change but the Zesty guys will be able to mod that in about 30 sec's flat I reckon Lykle came up with the adaptor in about 30 mins.
see https://www.shapeways.com/product/62MB3QZJ7/nimble-mount-base-new-effector?optionId=62810434
-
The hot end mounting hasn't changed. We managed to squeeze in 3 extra mounting holes in the production version, see https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer#Connectors_and_Wiring.
-
Will this be compatible with the upcoming Pico hybrid hotend or will it only work with the special e3d mount?
Would love to pair this with a pico hybrid and Zesty nimble cable extruder
-
It has a 12mm diameter hole in the centre for mounting the hot end.
-
David any idea when we will be able to order I am that impressed by the Beta that I will want to put a release one on the delta to take account of the changes that have been made?
Doug
-
We expect to have them available early next month.
-
Hmm…
No place for your IR z-probe device?
Frederick
-
Hmm…
No place for your IR z-probe device?
Frederick
That's because it has been superseded by an on-board nozzle contact sensor which doesn't care about bed type, material or colour.
-
@CaLviNx:
]
That's because it has been superseded by an on-board nozzle contact sensor which doesn't care about bed type, material or colour.
Thanks.
How does that work. The picture doesn't seem to provide that information.
Frederick
-
It's a secret until we start shipping them.
-
I can confirm however that it works and gives me deviations of less than 10b microns
-
hi what's the price's estimation for the whole set (carriage, sensor if sold separately, and effector) ?
-
I hope to make an announcement regarding price and availability soon.
I have updated the assembly instructions at https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer to cover programming the sensitivity of the nozzle contact probe using the new M672 command, and to reflect changes between the prototype and production effector.
-
I hope to make an announcement regarding price and availability soon.
I have updated the assembly instructions at https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer to cover programming the sensitivity of the nozzle contact probe using the new M672 command, and to reflect changes between the prototype and production effector.
Will you be selling the arms and ball studs too or will these need to be sourced directly from Hayden?
-
Will you be selling the arms and ball studs too or will these need to be sourced directly from Hayden?
I have a sneaky feeling you didnt actually read the whole thread, the quote below was taken from page ONE
cough
Any chance you or T3P3 will make custom length Haydn Huntley magnetic arms and sell it all as a kit with the PCB?
We will certainly explore collaborating with Haydn on purchasing his mag arms in larger volumes to bundle with the effectors, once we get closer to a production version. That makes sense for people in the UK/Europe at least (it makes less sense to import them from the US just to ship them back).
-
@CaLviNx:
Will you be selling the arms and ball studs too or will these need to be sourced directly from Hayden?
I have a sneaky feeling you didnt actually read the whole thread, the quote below was taken from page ONE
cough
Any chance you or T3P3 will make custom length Haydn Huntley magnetic arms and sell it all as a kit with the PCB?
We will certainly explore collaborating with Haydn on purchasing his mag arms in larger volumes to bundle with the effectors, once we get closer to a production version. That makes sense for people in the UK/Europe at least (it makes less sense to import them from the US just to ship them back).
No, this answer says they would explore it, I'm now asking as they are almost ready to announce pricing/availability whether this will include an option on arms. If it doesn't then I can order from the US now so that I have them in good time for when the effector kits become available.
-
I have the utmost confidence in the fact that David, Tony & Roland will fully appraise us of the available combinations when they become available. no matter how infuriating it is (for me) to be waiting for the release.
-
Thi is being discussed right now, but Initially I think there will be these options:
1. PCB effector, carriage adapters and connector kit only. This is for customers who will not be using a E3Dv6 hot end.
2. As #1 plus custom heatsink to replace the standard E3Dv6 heatsink.
T3P3 (who do the order processing and shipping for Duet3D), Filastruder and some of our other distributors are also E3D resellers. So it's likely that they will provide an option to buy the rest of the E3Dv6 parts at the same time, probably with a choice of thermistor or PT100 temperature sensor.
As Tony said already, we are looking at stocking Haydn's magnetic rods for the benefit of customers in the UK and Europe. I don't know whether we will have them by the time we start shipping the effector.
