• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Strange bugs 3.3beta2

Scheduled Pinned Locked Moved Unsolved
Beta Firmware
8
48
2.4k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Dep
    last edited by Dep 17 Mar 2021, 11:38

    Errors periodically pop up like in the screenshots:

    IMG_2998_cr.jpg

    I didn’t notice this before.

    Also tell me when mesh compensation is on, should the bed move when moving along the axis?

    The unevenness of the table is about 0.5 mm, mesh compensation is on, I move the printer head (by PanelDue) and there is no movement of the Z motors.

    Thanks.

    undefined 1 Reply Last reply 17 Mar 2021, 11:40 Reply Quote 0
    • undefined
      jay_s_uk @Dep
      last edited by 17 Mar 2021, 11:40

      @Dep thats generally interference in the cable for the paneldue. how long is the paneldue cable, what type of cable is it and does it run past any motors etc?

      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

      1 Reply Last reply Reply Quote 0
      • undefined
        Dep
        last edited by 17 Mar 2021, 12:07

        Good idea! Thanks, I'll fix it.

        The wire is long, it does not pass near others, but nevertheless it must be made with shielding!

        All the same, what about the movement along the axes with mesh compensation enabled? Should the bed move?

        1 Reply Last reply Reply Quote 0
        • undefined
          dc42 administrators
          last edited by dc42 17 Mar 2021, 13:06

          Which Duet?

          Have you confirmed using M115 that you really do have RRF 3.3beta2 running?

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          undefined 1 Reply Last reply 17 Mar 2021, 13:07 Reply Quote 0
          • undefined
            Dep @dc42
            last edited by Dep 17 Mar 2021, 13:07

            @dc42 Duet 3 MB6HC (MB6HC)
            RepRapFirmware for Duet 3 MB6HC 3.3beta2 (2021-03-10)

            Yes:

            M115
            FIRMWARE_NAME: RepRapFirmware for Duet 3 MB6HC FIRMWARE_VERSION: 3.3beta2 ELECTRONICS: Duet 3 MB6HC v1.01 or later FIRMWARE_DATE: 2021-03-10 13:39:39
            1 Reply Last reply Reply Quote 0
            • undefined
              Dep
              last edited by 17 Mar 2021, 13:13

              Another error while unloading the filament:

              IMG_3003_cr.jpg

              I don't use the M4 command anywhere.
              Macro:

              ; Un Load
              if state.currentTool = -1 ; no tool
              M291 S1 T5 P{"Please select tool before load"} R"Cannot Unload"
              abort
              if heat.heaters[{state.currentTool}].current < 190
              G10 P{state.currentTool} S220 R0
              M291 P"...for loading filament..." R"...heating up hotend..." S0 T10
              M116 P{state.currentTool}
              M300 S2000 P500 G4 P500 M300 S1000 P500 ; Play sound
              M291 P"Ready for filament UnLoading. Press OK to start." R"Filament Handling" S2
              M913 E100:100:100:100 ; Motor curents to Full
              M83 ; relative extrusion
              G1 H2 E20 F250 ; Purge
              G1 H2 E-60 F800 ; feed up from Extruder and wait
              M400
              G4 S5 ; Wait 5 sec
              G1 H2 E-100 F800 ; feed up from Extruder
              M567 P{state.currentTool} E0:1 ; Motors mix to unload
              G1 H2 E-2300 F6000 ; feed up to 2300mm
              M913 E100:0:100:0 ; Motor curents to work
              M567 P{state.currentTool} E1:1 ; Motors mix to work
              G10 P{state.currentTool} S0 R0
              1 Reply Last reply Reply Quote 0
              • undefined
                dc42 administrators
                last edited by 17 Mar 2021, 13:13

                The command N1912 M409 F"d99f" is valid, although I am surprised that there is no K parameter. Also the N1912 prefix would not normally be included in a "Bad command" message. So I suspect that the command actually contains a non-printing character right at the start. This could be caused by interference pickup, especially if the PanelDue cable runs close to a stepper motor cable.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                undefined 1 Reply Last reply 17 Mar 2021, 13:15 Reply Quote 0
                • undefined
                  dc42 administrators @dc42
                  last edited by 17 Mar 2021, 13:15

                  The messages about M4 commands probably mean that the zero in M409 was corrupted.

                  What M575 P1 line do you have in config.g ?

                  Duet WiFi hardware designer and firmware engineer
                  Please do not ask me for Duet support via PM or email, use the forum
                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                  undefined 1 Reply Last reply 17 Mar 2021, 13:18 Reply Quote 0
                  • undefined
                    Dep
                    last edited by 17 Mar 2021, 13:16

                    @dc42 said in Strange bugs 3.3beta2:

                    PanelDue

                    PanelDue cable does not run near motors. But I will do it differently.

                    could you answer my question about the movement along the axes with mesh compensation enabled? Should the bed move?

                    I just can't figure it out.

                    undefined 1 Reply Last reply 17 Mar 2021, 13:19 Reply Quote 0
                    • undefined
                      Dep @dc42
                      last edited by 17 Mar 2021, 13:18

                      @dc42 said in Strange bugs 3.3beta2:

                      M575

                      M575 P1 B57600 S1 ; Comms parameters for PanelDue
                      1 Reply Last reply Reply Quote 0
                      • undefined
                        dc42 administrators @Dep
                        last edited by dc42 17 Mar 2021, 13:19

                        @Dep said in Strange bugs 3.3beta2:

                        could you answer my question about the movement along the axes with mesh compensation enabled? Should the bed move?

                        Yes, but it's hard to see whether the Z motors are moving a little or not on most printers. For example, with 400 Z steps/mm @ x16 microstepping on 1.8deg motors, the leadscrews will turn only 1/10 turn for 0.4mm movement.

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        undefined 1 Reply Last reply 17 Mar 2021, 13:20 Reply Quote 0
                        • undefined
                          Dep @dc42
                          last edited by 17 Mar 2021, 13:20

                          @dc42 In fact of the matter. I attached a long stick to the pulley. There is no movement and no sound.

                          And during printing, the compensation does not work.

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            dc42 administrators
                            last edited by 17 Mar 2021, 13:22

                            Run M122 and check that it reports "Bed compensation in use: mesh" while it is printing.

                            Duet WiFi hardware designer and firmware engineer
                            Please do not ask me for Duet support via PM or email, use the forum
                            http://www.escher3d.com, https://miscsolutions.wordpress.com

                            undefined 1 Reply Last reply 17 Mar 2021, 13:24 Reply Quote 0
                            • undefined
                              Dep @dc42
                              last edited by Dep 17 Mar 2021, 13:24

                              @dc42
                              I usually do that.

                              The size of the table at the printer is 1x1 meter. And the unevenness is about 0.5mm. I usually see the Z motors move.

                              Should I try to install an older firmware? Or does everything work for you?

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                Dep
                                last edited by 17 Mar 2021, 14:47

                                Another dangerous bug!

                                M558 K0 H5 A5 F120
                                Works as it should

                                M558 K0 H5 A5 F120: 120
                                Also works as it should

                                M558 K0 H5 A5 F120: 60
                                Broke today probe.
                                The bed goes up and breaks the probe. And continue to rise.

                                I checked it several times.

                                undefined undefined 2 Replies Last reply 17 Mar 2021, 16:12 Reply Quote 0
                                • undefined
                                  Phaedrux Moderator @Dep
                                  last edited by Phaedrux 17 Mar 2021, 16:12

                                  @Dep said in Strange bugs 3.3beta2:

                                  M558 K0 H5 A5 F120: 60
                                  Broke today probe.

                                  Why would you use F120: 60 at all?

                                  To better understand why the mesh isn't moving the Z axis please provide your config.g and homing files so we can see what other commands are taking affect.

                                  Z-Bot CoreXY Build | Thingiverse Profile

                                  undefined 1 Reply Last reply 18 Mar 2021, 16:50 Reply Quote 0
                                  • undefined
                                    Dep @Phaedrux
                                    last edited by Dep 18 Mar 2021, 16:50

                                    @Phaedrux thanks!

                                    Below is my config:

                                    ; Configuration file for Duet 3 (firmware version 3)
                                    ; executed by the firmware on start-up
                                    ; General preferences
                                    G90 ; send absolute coordinates...
                                    M83 ; ...but relative extruder moves
                                    M550 P"Pr-1100x1100" ; set printer name
                                    M575 P1 B57600 S1 ; Comms parameters for PanelDue
                                    M564 S1 H1 ; Forbid axis movements when not homed
                                    ; Network
                                    M552 P0.0.0.0 S1 ; enable network and acquire dynamic address via DHCP
                                    M586 P0 S1 ; enable HTTP
                                    M586 P1 S0 ; disable FTP
                                    M586 P2 S0 ; disable Telnet
                                    ; Drives
                                    M569 P0.0 S0 ; X drive goes back
                                    M569 P0.1 S1 ; Z1 drive
                                    M569 P0.2 S0 ; Z2 drive
                                    M569 P0.3 S1 ; Z3 drive
                                    M569 P0.4 S0 ; Z4 drive
                                    M569 P0.5 S0 ; Y drive
                                    G4 P500 ; Pause for toolboards init
                                    M569 P21.0 S1 ; Extruder 1 (T0)
                                    M569 P1.1 S0 ; Extruder 1 spool driver
                                    M569 P22.0 S1 ; Extruder 2 (T1)
                                    M569 P1.2 S0 ; Extruder 2 spool driver
                                    M569 P1.0 S1 ; Coupler
                                    M584 X0.0 Y0.5 Z0.1:0.2:0.3:0.4 C1.0 ; set Move drive mapping
                                    M584 E21.0:1.1:22.0:1.2 ; set Extruder drive mapping
                                    ; Axis Limits
                                    M208 Z-4:875 C0:500
                                    M208 X-570:570 Y-630:500
                                    ; Define the bed mounting coordinates
                                    M671 X-473:473:473:-473 Y730:730:-735:-735 S10 ;Snn Maximum correction allowed for each leadscrew in mm (optional, default 1.0)
                                    ; Endstops
                                    M574 X1 S1 P"!io1.in" ; configure active-high endstop for high end on X via pin !io1.in
                                    M574 Y2 S1 P"!io2.in" ; configure active-high endstop for low end on Y via pin !io2.in
                                    M574 Z0 P"nil" ; no endstop on Z
                                    M574 C1 S3 ; Stall detect coupler at low end of its range
                                    ;Steps per mm = (Motor Steps per Revolution * Driver Microstep) / (Belt Pitch * Pully Number of Teeth)
                                    ; X: GT2-20 / Y: HTD3-20 * (48/16) / Z: HTD5-20 * 6
                                    M92 X80 Y160 Z800 C200 ; set steps per mm
                                    M92 E420.00:115.00:420.00:115.00 ; set steps per mm
                                    M350 X16 Y16 Z16 E16:16 I1 ; configure microstepping with interpolation
                                    M350 C16 I1
                                    M566 X420 Y420 Z8 C2 E200:200:200:200 ; Set maximum instantaneous speed changes (mm/min)
                                    M203 X9000.00 Y9000.00 Z600.00 C10000 E6000.00 ; set maximum speeds (mm/min)
                                    M201 X1200.00 Y1200.00 Z100.00 C500 E2500 ; set accelerations (mm/s^2)
                                    M204 P250 T1200 ; Travel and print acceleration
                                    M906 X1200 Y1600 Z2400 C500 E900:900:900:900 ; set motor currents (mA) and motor idle factor in per cent
                                    M913 C50
                                    M906 I30
                                    M913 E100:0:100:0 ; set Working current to Extruders
                                    M84 S120 ; Set idle timeout
                                    ;Stall Detection
                                    M915 C S5 F0 H200 ; Coupler
                                    ; Calibrate Nozzle Height probe
                                    M558 K1 P8 B0 C"^io8.in" H30 F120 T9000
                                    ; Z-Probe
                                    M558 K0 P5 B1 C"^io7.in" H5 A5 F120 T9000 ; set Z probe type to switch and the dive height + speeds
                                    G31 K0 X0 Y0 Z0 P1000 ; set Z probe trigger value, offset and trigger height
                                    M557 X-500:500 Y-500:500 S100 ; define mesh grid
                                    ; ==== Heaters ====
                                    ; Bed
                                    M308 S0 P"temp0" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin temp0
                                    ;M950 H0 C"out0" T0 ; create bed heater output on out0 and map it to sensor 0
                                    M950 H0 C"out0" T0 Q10 ; Heater --> SSD-Steuerung
                                    ;M307 H0 B0 S0.80 ; disable bang-bang mode for the bed heater and set PWM limit
                                    ;M307 H0 R0.425 C261.3 D4.03 S0.80 ; Tuned
                                    M307 H0 R0.191 C560.9 D3.56 S1.00 V24.1
                                    M140 H0 ; map heated bed to heater 0
                                    M143 H0 S120 ; set temperature limit for heater 0 to 120C
                                    ; Chamber
                                    M308 S5 P"temp1" Y"thermistor" T100000 B4138 ; configure sensor 5 as thermistor on pin temp1
                                    M950 H5 C"out9" T5 Q10 ; create chamber heater output on temp1 and map it to sensor 5
                                    M307 H5 R1.000 C30.9 D9.18 S1.00 V24.1 ; Tuned
                                    M141 H5 ; map chamber to heater 5
                                    M143 H5 S75 ; set temperature limit for heater
                                    M950 F5 C"out4" Q500 ; cooling fan
                                    M106 P5 S0 H-1 C"Filament FAN" ; Control be trigger2
                                    ;M106 P5 S1 H5 T22:60 ; thermistatic control
                                    M950 J8 C"0.io6.in" ; Input 8 for filament Fan
                                    M581 T2 P8 S1 R0 ; Invoke trigger 2 when an inactive-to-active edge is detected on input 8
                                    ; Extruder 1
                                    M308 S1 P"21.temp0" Y"thermistor" T100000 B4725 ; configure sensor 1 as thermistor on pin 121.temp0
                                    M950 H1 C"21.out0" T1 ; create nozzle heater output on 121.out0 and map it to sensor 1
                                    M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
                                    M143 H1 S285 ; set temperature limit for heater 1 to 285C
                                    ;M307 H1 R3.214 C42.3 D7.77 S0.75 V23.2 ; Tuned
                                    M307 H1 R0.056 C194.7 D8.90 S1.00 V23.9 ; small block
                                    ;M307 H1 R3.358 C190.6 D7.20 S0.60 V23.6
                                    ; Extruder 2
                                    M308 S2 P"22.temp0" Y"thermistor" T100000 B4725 ; configure sensor 2 as thermistor on pin 122.temp0
                                    M950 H2 C"22.out0" T2 ; create nozzle heater output on 122.out0 and map it to sensor 2
                                    M307 H2 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
                                    M143 H2 S285 ; set temperature limit for heater 2 to 285C
                                    ;M307 H2 R3.056 C229.5 D7.91 S0.80 V23.3 ; Tuned
                                    ;M307 H2 R3.090 C199.8 D7.36 S0.75 V23.3
                                    ;M307 H2 R3.202 C234.301:234.301 D7.52 S0.70 V23.3 B0 I0
                                    M307 H2 R3.358 C190.6 D7.20 S0.60 V23.6
                                    ; *** Fans
                                    ; Extruder 1 Fan
                                    M950 F0 C"21.out1" Q500 ; Part cooling fan
                                    M106 P0 S0 B0.1 H-1 ; Default off. booststart for 0.1s (B0.1); thermostatic control off
                                    M950 F1 C"21.out2" Q500 ; Hotend cooling fan
                                    M106 P1 S1 H1 T50 ; Default on. thermistatic control on above 50C
                                    ; Extruder 2 Fan
                                    M950 F2 C"22.out1" Q500 ; Part cooling fan
                                    M106 P2 S0 B0.1 H-1 ; Default off. booststart for 0.1s (B0.1); thermostatic control off
                                    M950 F3 C"22.out2" Q500 ; Hotend cooling fan
                                    M106 P3 S0 H2 T50 ; Default on. thermistatic control on above 50C
                                    ; Tools
                                    ; Extruder 1 Tool
                                    M563 P0 S"Extruder-1" D0:1 H1 F0
                                    M567 P0 E1:1 ; mixing
                                    G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
                                    G10 P0 X0 Y76 Z0 ; Reset tool axis offsets
                                    ; Extruder 2 Tool
                                    M563 P1 S"Extruder-2" D2:3 H2 F2 ; define tool 1
                                    M567 P1 E1:1 ; mixing
                                    G10 P1 R0 S0 ; set initial tool 1 active and standby temperatures to 0C
                                    G10 P1 X0 Y76 Z0 ; Reset tool axis offsets
                                    ; Retraction
                                    ;M207 S6.5 R0.0 F4800 T4800 Z0.0
                                    M207 S4 R0.0 F3000 T2100 Z0.4
                                    ; M207: Set retract length
                                    ; Parameters
                                    ; Pn Tool number (optional, supported in RRF 3.01 and later only)
                                    ; Snnn positive length to retract, in mm
                                    ; Rnnn positive or negative additional length to un-retract, in mm, default zero
                                    ; Fnnn retraction feedrate, in mm/min
                                    ; Tnnn feedrate for un-retraction if different from retraction, mm/min (RepRapFirmware 1.16 and later only)
                                    ; Znnn additional zlift/hop
                                    ; Example: M207 S4.0 F2400 Z0.075
                                    ; FEEDRATE CONVERSIONS
                                    ; 20mm/s = F1200 ; 100mm/s = F6000
                                    ; 35mm/s = F2100 ; 120mm/s = F7200
                                    ; 50mm/s = F3000 ; 133mm/s = F8000
                                    ; 70mm/s = F4200
                                    ; * ======= tool offsets ======== *
                                    ; Set in config-override.g
                                    ;G10 P0 X0 Y76 Z-21 ; T0
                                    ;G10 P1 X0 Y76 Z-21 ; T1
                                    ; Filament monitors
                                    ; ** Rotating
                                    M591 P3 C"21.io1.in" D0 R30:160 S1
                                    M591 P3 C"22.io1.in" D2 R30:160 S1
                                    ; ** Endstops
                                    M950 J4 C"!^1.io1.in" ; Input 4 for filament trigger
                                    M950 J5 C"!^1.io2.in" ; Input 5 for filament trigger
                                    ; Invoke trigger 1 (M25) when an active-to-inactive edge is detected on input 4 and 5 and a file is being printed from SD card
                                    M581 T1 P4 S0 R1
                                    M581 T1 P5 S0 R1
                                    ; Miscellaneous
                                    M572 D0 S0.02 ; pressure advance T0
                                    M572 D1 S0.02 ; pressure advance T1
                                    ;M572 D2 S0.05 ; pressure advance T2
                                    ;M572 D3 S0.05 ; pressure advance T3
                                    ; Set up the dock indicator switches on the tools.
                                    M950 J0 C"!^io3.in" ; GpIn 3 = tool 0 dock switch
                                    M950 J1 C"!^io4.in" ; GpIn 4 = tool 1 dock switch
                                    ; Z Motors brake
                                    M950 P0 C"0.out1"
                                    ; Z Motors brake OFF
                                    G92 Z0
                                    G91 ; Relative mode
                                    M400 ; make sure everything has stopped before we change the motor currents
                                    M913 Z100 ; drop motor currents to 20%
                                    G1 Z0.05
                                    M400
                                    G4 P1000 ; Pause
                                    M42 P0 S1 ; Brake oFF
                                    M911 S23.5 R23.8 P"M42 P0 S0"
                                    G90
                                    ;M593 F50 ; cancel ringing at 50Hz
                                    M376 H20 ; bed compensation taper
                                    M501 ; load saved parameters from non-volatile memory
                                    ;G29 S1 ; Do not use G29 S1 within config.g, because no Z=0 datum has been established at that point
                                    G90 ; !!! absolute positioning

                                    homez:

                                    ; homez.g
                                    ; called to home the Z axis
                                    while iterations < 2
                                    if iterations < #sensors.gpIn && sensors.gpIn[iterations] != null && sensors.gpIn[iterations].value = 0
                                    M291 S1 T5 P{"Please return tool "^iterations^" to dock before homing"} R"Cannot home"
                                    abort
                                    ;M290 R0 S0 ; clear babystepping
                                    ;M561 ; clear any bed transform
                                    G91 ; Relative mode
                                    M400 ; make sure everything has stopped before we change the motor currents
                                    ;M913 Z80 ; drop motor currents to 20%
                                    G1 H2 Z5 F1000 ; Lower the bed
                                    ;M913 Z100 ; motor currents to 100%
                                    G90 ; back to absolute positioning
                                    ;G1 X0 Y0 F9000 ; Position the endstop above the bed centre
                                    G1 X-473 Y500 F9000 ; Position the endstop near leadscrew
                                    ;G1 X473 Y500 F9000 ; Position for test
                                    M400
                                    ;if move.axes[2].machinePosition > 9
                                    ; M558 K0 F1000 H3
                                    ; G30 Z-9999
                                    M558 K0 F600 H5 A1
                                    G30 Z-9999
                                    M558 K0 F120 H5 A5
                                    G30 Z-9999
                                    M400
                                    ;M558 K0 H30
                                    ;G91 ; Relative mode
                                    ;G1 Z10 F1000 ; Lower the bed
                                    ;G90 ; back to absolute positioning

                                    bed.g (called from homeall.g)

                                    ; bed.g
                                    ; Called to align the gantry to the bed plane via G32
                                    while iterations < 2
                                    if iterations < #sensors.gpIn && sensors.gpIn[iterations] != null && sensors.gpIn[iterations].value = 0
                                    M291 S1 T5 P{"Please return tool "^iterations^" to dock before homing"} R"Cannot home"
                                    abort
                                    M290 R0 S0 ; clear babystepping
                                    M561 ; clear any bed transform
                                    M84 E0:1 ; Turn off noisy Extruder motor
                                    M400 ; make sure everything has stopped
                                    M98 P"homez.g"
                                    M558 K0 H10 F120 ; F120
                                    M98 P"/macros/Move/bed_level_points"
                                    ;M98 P"homez.g"
                                    ;G28 Z
                                    ;G1 X0 Y0 F12000 ; Position the endstop above the bed centre
                                    ;M558 F120
                                    ;G30 Z-9999
                                    ;M400
                                    M98 P"homez.g"
                                    M558 K0 H5

                                    mesh.g

                                    ; mesh.g
                                    if !move.axes[0].homed || !move.axes[1].homed || !move.axes[2].homed || !move.axes[3].homed
                                    M291 S1 T5 P{"Please Home before probe"} R"Cannot probe"
                                    abort
                                    if state.currentTool != -1
                                    M291 S1 T5 P{"Please return All tools to dock before probing"} R"Cannot probe"
                                    abort "Cannot do mesh probing when a tool is selected"
                                    M290 R0 S0 ; clear babystepping
                                    M561 ; clear any bed transform
                                    ;G32 ; Level the gantry
                                    ;M98 P"homez.g"
                                    ; Heat the bed to 80C
                                    ;M291 P"Heating up the bed..." R"Probing New Bed Mesh" T5
                                    ;M190 S80
                                    ;M116
                                    ;G32 ; Level the gantry again while everything is hot
                                    M558 K0 H3 T9000 F120 A5
                                    G29 S0
                                    M558 K0 H5 T9000
                                    M140 S0 ; Turn off bed
                                    M291 P"Done!" R"Bed Mesh" T5

                                    homeall.g (G29 S1 here)

                                    ; homeall.g
                                    ; called to home all axes
                                    ;
                                    M98 P"homex.g"
                                    M98 P"homey.g"
                                    M98 P"bed.g"
                                    G29 S1
                                    1 Reply Last reply Reply Quote 0
                                    • undefined
                                      Phaedrux Moderator
                                      last edited by 18 Mar 2021, 19:01

                                      @Dep said in Strange bugs 3.3beta2:

                                      M98 P"/macros/Move/bed_level_points"

                                      What's in that macro?

                                      @Dep said in Strange bugs 3.3beta2:

                                      M98 P"homex.g" M98 P"homey.g"

                                      Can you share these as well?

                                      Can you also share the results of sending M98 P"config.g" and share your slicer start gcode.

                                      Z-Bot CoreXY Build | Thingiverse Profile

                                      undefined 1 Reply Last reply 18 Mar 2021, 19:19 Reply Quote 0
                                      • undefined
                                        Dep @Phaedrux
                                        last edited by 18 Mar 2021, 19:19

                                        @Phaedrux оf course

                                        bed_level_points :

                                        G30 P0 X-473 Y500 Z-99999 ;P0 - Probe point 0 (not drive)
                                        G30 P1 X473 Y500 Z-99999
                                        G30 P2 X473 Y-500 Z-99999
                                        G30 P3 X-473 Y-500 Z-99999 S4 ;set correction

                                        homex.g

                                        ; homex.g
                                        ; called to home the X axis
                                        ;
                                        while iterations < 2
                                        if iterations < #sensors.gpIn && sensors.gpIn[iterations] != null && sensors.gpIn[iterations].value = 0
                                        M291 S1 T5 P{"Please return tool "^iterations^" to dock before homing"} R"Cannot home"
                                        abort
                                        G91 ; relative positioning
                                        M400 ; make sure everything has stopped before we change the motor currents
                                        ;M913 Z80 ; drop motor currents to 20%
                                        G1 H2 Z5 F6000 ; lift Z relative to current position
                                        ;M913 Z100 ; motor currents to 100%
                                        G1 H1 X-1200 F6000 ; move quickly to X axis endstop and stop there (first pass)
                                        G1 H2 X5 F6000 ; go back a few mm
                                        G1 H1 X-1200 F360 ; move slowly to X axis endstop once more (second pass)
                                        G1 H2 X5 F6000 ; move away from end
                                        G1 H2 Z-5 F6000 ; up Z again
                                        G90 ; absolute positioning

                                        homey.g

                                        ; homey.g
                                        ; called to home the Y axis
                                        ;
                                        while iterations < 2
                                        if iterations < #sensors.gpIn && sensors.gpIn[iterations] != null && sensors.gpIn[iterations].value = 0
                                        M291 S1 T5 P{"Please return tool "^iterations^" to dock before homing"} R"Cannot home"
                                        abort
                                        if !move.axes[0].homed
                                        M98 P"homex.g"
                                        G91 ; relative positioning
                                        M400 ; make sure everything has stopped before we change the motor currents
                                        ;M913 Z80 ; drop motor currents to 20%
                                        G1 H2 Z5 F6000 ; lift Z relative to current position
                                        ;M913 Z100 ; motor currents to 100%
                                        G1 H1 Y1205 F6000 ; move quickly to Y axis endstop and stop there (first pass)
                                        G1 H2 Y-5 F6000 ; go back a few mm
                                        G1 H1 Y1205 F360 ; move slowly to Y axis endstop once more (second pass)
                                        G1 H2 Y-50 F6000 ; move away from end
                                        G1 H2 Z-5 F6000 ; up Z again
                                        G90 ; absolute positioning

                                        Slicer (S3D) start code:

                                        ; START code
                                        M140 S[bed0_temperature]
                                        M106 S0 ;fan off
                                        G92 E0; reset extruder distance
                                        G28
                                        T0 ; Select tool 0
                                        M116
                                        G10 P0 S[extruder0_temperature] R160
                                        M116
                                        M98 P"/macros/Purge Filament"
                                        ;--- end start gcode ---
                                        1 Reply Last reply Reply Quote 0
                                        • undefined
                                          Dep
                                          last edited by Dep 18 Mar 2021, 19:20

                                          @Phaedrux said in Strange bugs 3.3beta2:

                                          M98 P"config.g"

                                          18.03.2021, 22:24:45 M98 P"config.g"
                                          HTTP is enabled on port 80
                                          FTP is disabled
                                          TELNET is disabled
                                          1 Reply Last reply Reply Quote 0
                                          5 out of 48
                                          • First post
                                            5/48
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA