Over extrusion at corners
-
I have noticed my prints have excess extrusion at the corners of things. Does that have to do with the slicer or the pressure advance in the config settings
-
@mendelevium pressure advance, speed, jerk, accel, temperature, any coast settings in your slicer, any mechanical issues in your printer etc all play a part.
If you haven't got any pressure advance enabled, then I would definitely start tuning it!
https://help.prusa3d.com/en/article/layers-and-perimeters_1748/
Edit: https://duet3d.dozuki.com/Wiki/Pressure_advance, sorry copied the wrong link! -
