Webcam setup

tecno

Running webcam on standalone RPi and I get video on port :8081 (MS HD WebCam)

Your Duet rejected the HTTP request: page not found
Check that the SD card is mounted and has the correct files in its /www folder

What am I missing in my setup? correct files in its /www folder what files??

Cheers
Bengt

SIam

if I am not mistaken you have to enter the link to the stream and not to the website of the cam. When you click with the right mouse button on the live stream and select open in new tab you should see the right link

tecno

@siam
Hmmm I don´t follow you on this, where can I find this stream? Rpi or PC?

SIam

@tecno after you have opened the page 192.168.1.105:8081 you see the live stream klick here with the right button on the live video and select open in new tab you should see the right link

tecno

@siam

That link is the same

SIam

@tecno you are right i have tested it here did you using the right protocoll (http://192.168.1.105:8081) ?

tecno

@siam

Right and right, I just installed Monitor on the Pi and have video.

tecno

As I can not get my webcam on Rpi to work can somebody tell me what to install on my RPi so can get video into DWC?

Not Octopi as as this demands another RPi just fot purpose. I already have DWC running on RPi.

Greatful for suggestions to try as http does not cut.

SIam

@tecno @tecno i think with you have installed monitor you mean motion can you post the config file you use for motion here

tecno

@siam

My bad yes it is Motion

motion.conf.txt camera1-dist.conf.txt

SIam

@tecno the first thing is did you add .txt now for posting here? If not then rename motion.conf.txt to motion.conf and restart motion

tecno

@siam
Yes I renamed to be able to post here as .conf is not allowed.

SIam

@tecno
so far i can only find one issue in the config but here is the question have you installed it to motion or to monitor ?

# Target base directory for pictures and films
# Recommended to use absolute path. (Default: current working directory)
target_dir /home/pi/Monitor

tecno

@siam

Just did run the install from terminal so it migt be done wrong . A bit confused as it biulds up with a lot of files that I do not need. Is it the survailance that pops in and register all video?

SIam

@tecno
find this line in your config and set it to off

# Use ffmpeg to encode videos of motion (default: off)
ffmpeg_output_movies on

If this is on Motion will save all recordings to sd card and after a few day's your sd card is full.
you can delete all .mkv videos from your sd-card in /home/pi/monitor

the config seems then to be good!

Then we are back on the problem When you open http://192.168.1.105:8081 in an external Browser you get the Live Video

and when you add http://192.168.1.105:8081/ in the Duet Settings and then go to webcam you got the error 404

what happens if you activate do not append extra http qualifier... in the duet webcam settings?