3950 1% pullup thermistor is built-in ?

[peter247]

The Silicone heater bed I'm looking at says :- "3950 1% pullup thermistor is built-in"
Can't see that in the configurator type so any clues to how I would set it up ?

[Phaedrux]

Try the default first and see if it gives an accurate temp.
Do you have any other info on the bed heater or thermistor?

[peter247]

@phaedrux no.
https://makers-hut.com/product/round-square-rubber-heater-pad-mat-12v-24v-110v-220v-100w-to-500w-3d-printer/

[dc42]

@peter247 use T100000 B3950 C0 in your M308 command for the bed heater.