Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 restarts during printing

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    14
    345
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • RedFlashundefined
      RedFlash @SIam
      last edited by

      @siam
      It was installed and i downgraded. All modules were disconnected.

      SIamundefined 1 Reply Last reply Reply Quote 0
      • SIamundefined
        SIam @RedFlash
        last edited by

        @redflash This error which is now showing in your log should be fixed with rrf 3.3 rc2 if you have the same error with 3.3 rc 3 please post the result from m122 with the latest firmware

        Hypercube-Evolution-Hybrid, Piezo Orion, Orbiter
        Duet WiFi 1.02 or later + DueX5
        RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0beta4 (2021-09-27 11:30:36)
        Duet WiFi Server: 1.26
        Duet Web Control 3.4.0beta4 (2021-09-27)

        RedFlashundefined 1 Reply Last reply Reply Quote 0
        • RedFlashundefined
          RedFlash @SIam
          last edited by RedFlash

          @siam
          It was the same with 3.3rc3, but in the log there was „cause:watchdog“.

          I‘ll update again i take a new M122.

          853912B8-8AE6-45DE-A9B0-10ECD8827053.jpeg

          1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @RedFlash
            last edited by

            @redflash please install the latest 3.3RC3+ build from https://www.dropbox.com/sh/nmpsl9a3jfsumm5/AAA6adSjEcd1AM_j5_tVberGa?dl=0 and try again. If is still resets, post another M122 report.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            RedFlashundefined 1 Reply Last reply Reply Quote 0
            • RedFlashundefined
              RedFlash @dc42
              last edited by

              @dc42
              It still resets.

              6.6.2021, 17:21:15 	M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.3RC3 (2021-05-26 12:29:42) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode)
Board ID: 08DJM-956BA-NA3TJ-6J1FG-3S86S-TU9YS
Used output buffers: 10 of 40 (24 max)
=== RTOS ===
Static ram: 150784
Dynamic ram: 92436 of which 380 recycled
Never used RAM 110592, free system stack 192 words
Tasks: NETWORK(ready,25.8%,232) ETHERNET(notifyWait,0.1%,117) HEAT(delaying,0.0%,295) Move(notifyWait,0.0%,302) CanReceiv(notifyWait,0.0%,945) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,333) TMC(notifyWait,7.9%,93) MAIN(running,65.5%,924) IDLE(ready,0.6%,29), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:17 ago, cause: watchdog
Last software reset at 2021-06-06 15:22, reason: MemoryProtectionFault mmarValid daccViol, GCodes spinning, available RAM 115676, slot 1
Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x00427804 BFAR 0x000000cd SP 0x2041fbe0 Task MAIN Freestk 1670 ok
Stack: 00000000 00000000 00000000 00000000 00000081 00442ab5 004296c6 41030000 00000000 00000001 00000000 0046b1e7 2042b6e4 00000000 00000000 0046b535 00000000 0046b6e9 a5a5a5a5 ffffffff 2042b6e4 2041e168 2042ba7c ffffffff 00000000 00000003 2042ba78
Error status: 0x00
Aux0 errors 0,0,0
Aux1 errors 0,0,0
Step timer max interval 130
MCU temperature: min 39.3, current 40.2, max 40.4
Supply voltage: min 24.0, current 24.1, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.1, current 12.1, max 12.2, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 0, standstill, reads 33139, writes 15 timeouts 0, SG min/max 0/0
Driver 1: position 0, standstill, reads 33139, writes 15 timeouts 0, SG min/max 0/0
Driver 2: position 0, standstill, reads 33139, writes 15 timeouts 0, SG min/max 0/0
Driver 3: position 0, standstill, reads 33139, writes 15 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 33140, writes 15 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 33140, writes 15 timeouts 0, SG min/max 0/0
Date/time: 2021-06-06 17:21:14
Slowest loop: 4.16ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 1.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 157, send timeouts 155, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 49 (min 49), ts 90/0/0
Last cancelled message type 30 dest 127
=== Network ===
Slowest loop: 2.33ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- Ethernet -
State: active
Error counts: 0 0 1 0 0
Socket states: 5 2 2 2 2 0 0 0
6.6.2021, 17:16:25 	M32 "0:/gcodes/CFFFP_towel_holder.gcode"
File 0:/gcodes/CFFFP_towel_holder.gcode selected for printing
              dc42undefined 1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators @RedFlash
                last edited by

                @redflash that's not the firmware from the folder that I linked to.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                RedFlashundefined 2 Replies Last reply Reply Quote 0
                • RedFlashundefined
                  RedFlash @dc42
                  last edited by RedFlash

                  @dc42
                  Oh man. Didn`t see the +. Hold on..

                  1 Reply Last reply Reply Quote 0
                  • RedFlashundefined
                    RedFlash @dc42
                    last edited by

                    @dc42

                    6.6.2021, 17:42:42 	M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.3RC3+4 (2021-06-05 16:20:17) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode)
Board ID: 08DJM-956BA-NA3TJ-6J1FG-3S86S-TU9YS
Used output buffers: 1 of 40 (18 max)
=== RTOS ===
Static ram: 150896
Dynamic ram: 92432 of which 392 recycled
Never used RAM 110472, free system stack 216 words
Tasks: NETWORK(ready,27.8%,272) ETHERNET(notifyWait,0.1%,117) HEAT(delaying,0.0%,331) Move(notifyWait,0.0%,302) CanReceiv(notifyWait,0.0%,946) CanSender(notifyWait,0.0%,373) CanClock(delaying,0.0%,340) TMC(notifyWait,7.0%,93) MAIN(running,64.4%,924) IDLE(ready,0.6%,29), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:18 ago, cause: software
Last software reset at 2021-06-06 17:42, reason: MemoryProtectionFault mmarValid daccViol, GCodes spinning, available RAM 107616, slot 0
Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x00427804 BFAR 0x20028009 SP 0x2041b168 Task MAIN Freestk 1657 ok
Stack: 00000000 00000001 00000001 00000000 00000000 0047a427 0047a426 61030000 00000000 0047a427 2042b7e8 00000000 00000000 0047a76f 00000000 20419408 00000000 00000000 198a2d17 a5a5a5a5 a5a5a5a5 2042d834 00000000 00000001 00000000 0047a427 2042d834
Error status: 0x00
Aux0 errors 0,0,0
Step timer max interval 125
MCU temperature: min 40.7, current 41.2, max 41.3
Supply voltage: min 24.0, current 24.1, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.1, current 12.1, max 12.2, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 1: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 2: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 3: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 38457, writes 15 timeouts 0, SG min/max 0/0
Date/time: 2021-06-06 17:42:41
Slowest loop: 4.01ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 1.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 164, send timeouts 162, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 49 (min 49), ts 94/0/0
Last cancelled message type 30 dest 127
=== Network ===
Slowest loop: 2.47ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- Ethernet -
State: active
Error counts: 0 0 1 0 0
Socket states: 5 2 2 2 2 0 0 0
6.6.2021, 17:34:44 	M32 "0:/gcodes/CFFFP_towel_holder.gcode"
File 0:/gcodes/CFFFP_towel_holder.gcode selected for printing
                    dc42undefined 2 Replies Last reply Reply Quote 0
                    • dc42undefined
                      dc42 administrators @RedFlash
                      last edited by

                      @redflash thanks, I am looking into it.

                      Duet WiFi hardware designer and firmware engineer
                      Please do not ask me for Duet support via PM or email, use the forum
                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                      1 Reply Last reply Reply Quote 0
                      • dc42undefined
                        dc42 administrators @RedFlash
                        last edited by

                        @redflash I suspect a hardware fault. When did you purchase the Duet 3? For how many weeks or months did the printer work properly?

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        RedFlashundefined 1 Reply Last reply Reply Quote 0
                        • RedFlashundefined
                          RedFlash @dc42
                          last edited by

                          @dc42
                          It‘s a Fysetc clone from Ali, 5 month in use.
                          I will throw that crap away and get a real one.

                          Thanks a lot for your help.

                          1 Reply Last reply Reply Quote 1
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA