Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    toolboard fail autoleveling

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    2
    3
    175
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Pseud3mysundefined
      Pseud3mys
      last edited by Pseud3mys

      hi !
      I am using a tool board with 3.3beta2+2. I have a bltouch connected to it.
      My issues is than the head move to high from the bed (twice the dive height). So it always return "Error: Probe was not triggered during probing move".
      The problem it is not because the dive height is to low, but because the firmware move the head 20mm of the bed instead of 10mm (=one dive height) and for the firmware this 20mm is 10mm like it "eat" 10mm for no reason, so after the 0 point is 10mm above the bed.
      I hope you enderstood myself.

      My prob config:

      M558 P9 C"^122.io0.in" H10 F120 T5000
      G31 K0 X-85 Y47 Z0 						;prob offset
      M950 S0 C"^122.io0.out"
      
      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @Pseud3mys
        last edited by

        @pseud3mys said in toolboard fail autoleveling:

        My issues is than the head move to high from the bed (twice the dive height).

        this has been fixed in 3.3.0
        I suggest updating to 3.3.0 and seeing what happens then

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        1 Reply Last reply Reply Quote 1
        • Pseud3mysundefined
          Pseud3mys
          last edited by

          @jay_s_uk It work thank you !

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA