Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. Pseud3mys
    • Profile
    • Following 0
    • Followers 0
    • Topics 13
    • Posts 128
    • Best 0
    • Controversial 0
    • Groups 0

    Pseud3mys

    @Pseud3mys

    0
    Reputation
    1
    Profile views
    128
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    Pseud3mys Unfollow Follow

    Latest posts made by Pseud3mys

    • RE: toolboard fail autoleveling

      @jay_s_uk It work thank you !

      posted in Tuning and tweaking
      Pseud3mysundefined
      Pseud3mys
    • toolboard fail autoleveling

      hi !
      I am using a tool board with 3.3beta2+2. I have a bltouch connected to it.
      My issues is than the head move to high from the bed (twice the dive height). So it always return "Error: Probe was not triggered during probing move".
      The problem it is not because the dive height is to low, but because the firmware move the head 20mm of the bed instead of 10mm (=one dive height) and for the firmware this 20mm is 10mm like it "eat" 10mm for no reason, so after the 0 point is 10mm above the bed.
      I hope you enderstood myself.

      My prob config:

      M558 P9 C"^122.io0.in" H10 F120 T5000
      G31 K0 X-85 Y47 Z0 						;prob offset
      M950 S0 C"^122.io0.out"
      
      posted in Tuning and tweaking
      Pseud3mysundefined
      Pseud3mys
    • RE: conditional Gcode with printer Mode

      @jay_s_uk thank you !

      posted in Gcode meta commands
      Pseud3mysundefined
      Pseud3mys
    • conditional Gcode with printer Mode

      Hi !
      I what to make to different pause script, one for the CNC mode and one for the FFF mode. Who can I make a "if" command with the M450 command ?
      like:

      if M450 == "PrinterMode:FFF"
      ;one pause script..
      if M450 == "PrinterMode:CNC"
      ;second pause script
      

      thank you !

      posted in Gcode meta commands
      Pseud3mysundefined
      Pseud3mys
    • RE: step/mm depend on microsteps ?

      @jay_s_uk okay thank you !

      posted in Tuning and tweaking
      Pseud3mysundefined
      Pseud3mys
    • step/mm depend on microsteps ?

      Hi !
      I use BMG x2 extruder and the fabricant say: "E-step value 415" but when I put in config:

      M92 E415.00:415.00
      

      The feed amout is not accurate (under the real lenght). The Estep value 415 can't be wrong so what I need to change for the M92 command ?

      Thank you !
      Alexandre

      PS: The gear ratio is 3:1 and the controller microstep is 32.

      posted in Tuning and tweaking
      Pseud3mysundefined
      Pseud3mys
    • RE: tool position freeze (3.2.2)

      @dc42 ok thank you !

      posted in Duet Web Control
      Pseud3mysundefined
      Pseud3mys
    • RE: tool position freeze (3.2.2)

      @dc42 To overcome this issues I use the 3.3beta2 metacommand:

      ; in my config.g file:
      M950 J8 C"^!125.io0.in"
      
      
      ; in a macros:
      G91
      while sensors.gpIn[8].value == 0 ; this loop run fine
      	G1 Z-0.01 F500
      G0 Z20 F300
      M400
      while sensors.gpIn[8].value == 0
      	G1 Z-0.01 F100
      G90
      

      And I have one question:

      • and after, can this replace a Z probe ? did the loop will stop at the exact moment the button is closed (with this 0.01 resolution) ?

      Thank you for your time and help !

      posted in Duet Web Control
      Pseud3mysundefined
      Pseud3mys
    • RE: tool position freeze (3.2.2)

      @dc42 I change the firmawre and DWC with your files and I try with my setup (3 extarnals drivers boards (CAN 40, 41, 42) and one toolboard with CAN 125) in standalone but only the busy status goes fine, the coordinate and speed still freeze after I send exactly this command (the same that in the config.g file).

      M558 P8 K2 C"^!125.io0.in" F300 T3000
      
      posted in Duet Web Control
      Pseud3mysundefined
      Pseud3mys
    • RE: tool position freeze (3.2.2)

      @phaedrux the bug stay the same in 3.2.2 or in 3.3beta2 (with the right DWC version). It is the all "status" box how freeze (the status "idle" don't go to "busy", speed and coordinates don't change) just the sensors part is not impacted.

      posted in Duet Web Control
      Pseud3mysundefined
      Pseud3mys