Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet3D PCB delta printer effector sneak preview

    Scheduled Pinned Locked Moved
    Smart effector for delta printers
    53
    367
    77.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A Former User?
      A Former User
      last edited by

      @T3P3Tony:

      @CaLviNx:

      Im intrigued by one of the extra holes I have spied in the effector kit !! I wonder how much free space there is around it ?

      located above the "input2" screen printed words on the right, as for me if there is a little free space around it I would use a hollow threaded nipple to locate my air cooling system !!

      Originally in an earlier iteration I had a few of these around the edge of the board, they were there to be used to secure zipties for cable strain relief. As the design progressed more and more had to be removed to make space for other things and in the end that is the only one left!
      It is quite close to the edge :

      https://cdn.pbrd.co/images/GFDdQHLE.png

      Be very careful with the trace running between it and the edge of the board though

      What is the diameter of the hole ?

      1 Reply Last reply Reply Quote 0
      • A Former User?
        A Former User
        last edited by

        @Dougal1957:

        That IP2 connector had to be moved slightly in the production run as it could cause a collision with the rods and cause a rod disconnect so don't think you could really use that but maybe you could if you used a right angle nipple suitably angled?

        Doug

        Good idea, if the hole can be massage (away from the trace) one of the following might work!!

        1 Reply Last reply Reply Quote 0
        • Dougal1957undefined
          Dougal1957
          last edited by

          The hole looks to me to be the same or very close to the ballstud holes which are 2.9mm Diam so yeah something like that but would need to be M3 I think?

          1 Reply Last reply Reply Quote 0
          • Dougal1957undefined
            Dougal1957
            last edited by

            Wonder how many have been ordered so far in the first 24 hours of being available lol?

            Doug

            1 Reply Last reply Reply Quote 0
            • Hey_Allenundefined
              Hey_Allen
              last edited by

              I ordered one Sunday, and it's already in the possession of the Royal Mail.

              No idea of the total numbers, T3DP3D would have to be the ones to say.

              1 Reply Last reply Reply Quote 0
              • Dougal1957undefined
                Dougal1957
                last edited by

                yes indeed mine is also in the Royal Mail hands just had to get a release version and keep the Beta one as a spare?

                Doug

                1 Reply Last reply Reply Quote 0
                • T3P3Tonyundefined
                  T3P3Tony administrators
                  last edited by

                  @Dougal1957:

                  The hole looks to me to be the same or very close to the ballstud holes which are 2.9mm Diam so yeah something like that but would need to be M3 I think?

                  Its slightly smaller 2.7mm the smallest i could make it to work with common mini zip ties

                  www.duet3d.com

                  1 Reply Last reply Reply Quote 0
                  • jannisjundefined
                    jannisj
                    last edited by

                    Just ordered Duet Wifi, PCB Effector, PT100 daughter board, E3D w/PT100 Sensor 🙂
                    Now the wait has started 🙂

                    About the Duet Wifi, has support for hidden SSID been added yet?

                    -Jannis

                    1 Reply Last reply Reply Quote 0
                    • dc42undefined
                      dc42 administrators
                      last edited by

                      @jannisj:

                      About the Duet Wifi, has support for hidden SSID been added yet?

                      -Jannis

                      If you mean support for connecting as a client to a hidden SSID, that is in version 1.19.

                      Duet WiFi hardware designer and firmware engineer
                      Please do not ask me for Duet support via PM or email, use the forum
                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                      1 Reply Last reply Reply Quote 0
                      • jannisjundefined
                        jannisj
                        last edited by

                        @dc42:

                        @jannisj:

                        About the Duet Wifi, has support for hidden SSID been added yet?

                        -Jannis

                        If you mean support for connecting as a client to a hidden SSID, that is in version 1.19.

                        Perfect!
                        Thanks 🙂

                        -Jannis

                        1 Reply Last reply Reply Quote 0
                        • dc42undefined
                          dc42 administrators
                          last edited by

                          I have created a new forum to discuss the smart effector here https://www.duet3d.com/forum/viewforum.php?id=13 so I will now close this thread.

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA