Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    T3P3 Kossel Mini R3 Wiring harness

    Scheduled Pinned Locked Moved
    Smart effector for delta printers
    9
    21
    3.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Dougal1957undefined
      Dougal1957
      last edited by

      @DjDemonD yes both rommie and myself use 24V heaters so well within the doubled up 24AWG Wiring
      @Zov yes they fit quite easily as long as you twist them well there should be no issues.

      Doug

      1 Reply Last reply Reply Quote 0
      • T3P3Tonyundefined
        T3P3Tony administrators
        last edited by

        @JohnOCFII:

        So - how much will the Smart Extruder decrease the 170mm diameter of the Kossel Mini compared to the T3P3 extruder?

        Thanks,

        John

        I have not tested it exactly (things like fan overhangs have an impact) but the rod spacing is 10mm wider so estimating 10mm less in radius, 20mm in diameter.

        www.duet3d.com

        1 Reply Last reply Reply Quote 0
        • Dougal1957undefined
          Dougal1957
          last edited by

          Tony does the effector really get that close to the towers on a R3 I've never seen one so don't know but guess it would also need a new carriage design for it as well?

          1 Reply Last reply Reply Quote 0
          • T3P3Tonyundefined
            T3P3Tony administrators
            last edited by

            The build area is setup by default to give a small amount of clearance., a larger effector would certainly require a slightly smaller build diameter, maybe not as much as 20mm (if the clearance is reduced). The R3 uses trucks that run on the 20x20 extrusion using delrin wheels. They are attached to the belt/arm carriages using the same bolt spacing as standard rails (20x20) so the PCB carriage adapter should fit in there fine. A slightly modified carriage with no mounts for traxas arms, 2mm thinner to make up for the carriage adaptor would be good.

            www.duet3d.com

            1 Reply Last reply Reply Quote 0
            • Dougal1957undefined
              Dougal1957
              last edited by

              another option may be to replace all the horizontal extrusions by some that are slightly longer and that should cost to much but it is a shame

              1 Reply Last reply Reply Quote 0
              • T3P3Tonyundefined
                T3P3Tony administrators
                last edited by

                yes rebuilding the printer bigger is always an option…

                www.duet3d.com

                1 Reply Last reply Reply Quote 0
                • number40fanundefined
                  number40fan
                  last edited by

                  Could probably get away with what DC42 did when he went to 4020 and just print some 2020 extensions.

                  1 Reply Last reply Reply Quote 0
                  • dc42undefined
                    dc42 administrators
                    last edited by

                    I rebuilt my original R1 Mini Kossel for a 300mm printable diameter by using longer horizontal extrusions and longer arms. I figured that I could live with the reduction in build height to about 90mm, and for a while I did.

                    If all you want to do is get back the lost build area after switching to the smart effector, you could increase the lengths of the arms and horizontal extrusions by a much smaller amount, and lose much less build height.

                    Duet WiFi hardware designer and firmware engineer
                    Please do not ask me for Duet support via PM or email, use the forum
                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                    1 Reply Last reply Reply Quote 0
                    • JohnOCFIIundefined
                      JohnOCFII
                      last edited by

                      @T3P3Tony:

                      @JohnOCFII:

                      So - how much will the Smart Extruder decrease the 170mm diameter of the Kossel Mini compared to the T3P3 extruder?

                      Thanks,

                      John

                      I have not tested it exactly (things like fan overhangs have an impact) but the rod spacing is 10mm wider so estimating 10mm less in radius, 20mm in diameter.

                      Thanks for the info!

                      1 Reply Last reply Reply Quote 0
                      • jannisjundefined
                        jannisj
                        last edited by

                        What would be the optimal cable to use to make a wiring harness?
                        I think I'll try to make it myself 🙂

                        -Jannis

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA