Duet 2 Ethernet not working
-
Hello there I have a duet2 Ethernet and duex 5. Last night I was doing some configuration to the board and I accidentally shorted my 3.3V pin and the GND pin at CONN-LCD when that happened my DWC lost connection and now my MCU gets bloody hot Deg light is on and 3.3V 5V lights on any suggestions on how to over come this problem I don’t know if that did kill my MCU or not if you guys know any place to send the board for a repair. Thank you
-
@moe-adams9093 if the processor is getting very hot then it's likely damaged. I would unplug everything, power by USB and see if it's still getting hot (and if anything else is getting hot).
-
@t3p3tony
Yes it gets really hot via USB and it looks like only the cpu is getting hot. -
@moe-adams9093 ok then I expect the the processor and possibly more is damaged. its hard to know in advance how much of the 3.3V logic will be damaged in this case.
