Belt tensión info...
-
Hi,
As I have commented in other recent posts, after my problems with my TLM. I'm going to start from almost 0 (I'll take advantage of some components) and I'm going to build a Corexy (RatDig v3)
In a Facebook group, from this printer, I have been passed an interesting document about the recommended tension for the belts. I take it for granted, and I post it here, in case it serves anyone
-
@peirof I found this interesting too, and https://www.youtube.com/watch?v=SdXT_SR8dC8 at 4:31 is a demonstration. Here are is few additional information: https://www.reddit.com/r/3Dprinting/comments/7m9m83/proper_belt_tension_for_dummies/
-
@joergs5 thanks... I will see