panel due 5i not connecting
-
@mfs12 I reflashed the fimware to 1.23 for checking with duet wifi 2
-
@adhanabal, and what happened?
Visit me on github at https://github.com/mfs12/
-
@mfs12 the panel due worked with duet2wifi board
-
so you tested:
- connected firmware paneldue-5.0i with firmware 3.3
- with Duet2 Wifi with 1.23 firmware
- and this was successful.
If not, please provide a detailed step-by-step procedure.
Visit me on github at https://github.com/mfs12/
-
your paneldue has probably old version. Check the top in the setup tab.
-
@mfs12 I will post photos tmw,
And I said I use panel due version 3.0
I will provide complete details tmw with photos -
then please upgrade to paneldue's to firmware version 3.3.
I think paneldue-3.0 is incompatible with newer RRF versions. Sorry, for the inconvenience.
Visit me on github at https://github.com/mfs12/
-
@mfs12 hi i have attached images for your reference, pls check , and also let me know i have wired it correctly.
-
@mfs12 hello all
it was my mistake my wiring was wrong i did not properly look at instructions page, thank you for helping me out,
please close this issue. -
undefined adhanabal has marked this topic as solved
-
@adhanabal thanks for feedback. Enjoy printing...
