inFIDEL - Inline filament diameter sensor

[IdefixRC]

Hi guys,

Anyone using this filament diameter sensor with duet? Is there a possibility to get this data utilized in realtime by the firmware including a distance offset (sensor installed near the spool/beginning of the bowden tube etc)?

https://www.prusaprinters.org/prints/57154-infidel-inline-filament-diameter-estimator-lowcost

Thanks

[samlogan87]

This sounds interesting. Interested to see what the response is

[zapta]

It may be possible to integrate with standard RRF. E.g a wifi esp32 polls the extrusion length and controls the flow percentage.

I think that the next step is it evaluate if dynamic flow adjustment provides any value. May or may not be the case.