Emergency Stop not Working RRF3.4 beta 7

[DavidHyper]

Hello Guys,

Its me again having problems with my emergency stop.I am using a Duet 6HC with a NC Button at the Input Pin io8.in.
If i push or release the button nothing happens.

This is my config.

I do my best to understand and read the documentations. But i can't get i working.

Thanks for your help!

[droftarts]

@davidhyper wire the io8.in pin to GND, not 3.3V, I think.

Ian

[DavidHyper]

@droftarts sometime its easy Thanks!

[droftarts]

@davidhyper you could also do it with the original wiring using M581 … S1:

Whether trigger occurs on an inactive-to-active edge of that input (S1, default), active-to-inactive edge (S0)

Ian