Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Serious error/fault with firmware or am I new to something?

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    4
    5
    247
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • BjornHundefined
      BjornH
      last edited by

      Hello.
      Long run programming my duet mini 5+ I stumbled over a weird thing.

      When I was probing I accidentally sent the code g30 s1 instead of g30 s-1 making my printer freeze. No homing working or no command, the machine acted like all home was homed but nothing would move no more. Machine would just run it course then say it didn't work.

      By sending the command G30 s1- i unfroze the machine.

      Is this something known to the community or one time problem???

      fcwiltundefined 1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @BjornH
        last edited by

        @bjornh

        Well S1 is not a valid parameter setting.

        @dc42 would know what the firmware does in a case like that.

        Frederick

        Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

        BjornHundefined 1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          What firmware version?

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • BjornHundefined
            BjornH @fcwilt
            last edited by

            @fcwilt Board: Duet 3 Mini 5+ (Mini5plus)
            Firmware: RepRapFirmware for Duet 3 Mini 5+ 3.3RC2 (2021-05-11)
            Duet WiFi Server Version: 1.26

            jay_s_ukundefined 1 Reply Last reply Reply Quote 0
            • jay_s_ukundefined
              jay_s_uk @BjornH
              last edited by

              @bjornh i suggest you upgrade to 3.4 and test the issue again and report back

              Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

              1 Reply Last reply Reply Quote 1
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA