@fcwilt Board: Duet 3 Mini 5+ (Mini5plus)
Firmware: RepRapFirmware for Duet 3 Mini 5+ 3.3RC2 (2021-05-11)
Duet WiFi Server Version: 1.26

Hello.
Long run programming my duet mini 5+ I stumbled over a weird thing.

When I was probing I accidentally sent the code g30 s1 instead of g30 s-1 making my printer freeze. No homing working or no command, the machine acted like all home was homed but nothing would move no more. Machine would just run it course then say it didn't work.

By sending the command G30 s1- i unfroze the machine.

Is this something known to the community or one time problem???

@t3p3tony email has been sent.

@t3p3tony

So i did upload and reinstall 3.3 from DWC, tried homing after. See picture, nothing happens when homing. I sent M122 after reinstalling. Your 3. option do not work i already tried this, what happens is that i double click reset it connects to the computer but after 5 sec it disconnect or if i drag the files the mount freezes.

New M122
m122
=== Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.3 (2021-06-15 21:46:11) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: DXGUZ-U196U-D65J0-40KMN-1Y03Z-RKST9
Used output buffers: 3 of 40 (24 max)
=== RTOS ===
Static ram: 102724
Dynamic ram: 106340 of which 156 recycled
Never used RAM 31628, free system stack 130 words
Tasks: NETWORK(ready,15.0%,264) HEAT(notifyWait,0.0%,307) Move(notifyWait,0.1%,305) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWait,0.0%,371) CanClock(delaying,0.0%,340) TMC(notifyWait,0.3%,115) MAIN(running,83.8%,426) IDLE(ready,0.0%,29) AIN(delaying,0.8%,273), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:04:03 ago, cause: software
Last software reset at 2021-10-31 20:34, reason: User, GCodes spinning, available RAM 31628, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
MCU revision 3, ADC conversions started 243911, completed 243911, timed out 0, errs 0
Step timer max interval 808
MCU temperature: min 37.2, current 37.6, max 37.9
Supply voltage: min 23.8, current 23.8, max 23.8, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/4/4, gc cycles 0
Driver 0: position 25200, assumed not present
Driver 1: position 25200, assumed not present
Driver 2: position 4000, assumed not present
Driver 3: position 0, assumed not present
Driver 4: position 0, assumed not present
Driver 5: position 0, assumed not present
Driver 6: position 0, assumed not present
Date/time: 2021-10-31 20:38:19
Cache data hit count 452273392
Slowest loop: 4.24ms; fastest: 0.11ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 3.5ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, maxWait 143770ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 2, completed moves 2, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 1321, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 17 (min 17), ts 734/0/0
Tx timeouts 0,0,734,0,0,587 last cancelled message type 4514 dest 127

=== Network ===
Slowest loop: 199.72ms; fastest: 0.06ms
Responder states: HTTP(2) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8

• WiFi -
  Network state is active
  WiFi module is connected to access point
  Failed messages: pending 0, notready 0, noresp 1
  WiFi firmware version 1.26
  WiFi MAC address d8:bf:c0:14:e6:36
  WiFi Vcc 3.30, reset reason Power up
  WiFi flash size 2097152, free heap 24480
  WiFi IP address 192.168.50.149
  WiFi signal strength -37dBm, mode 802.11n, reconnections 0, sleep mode modem
  Clock register 00002002
  Socket states: 0 0 0 0 0 0 0 0

@t3p3tony any response?

@t3p3tony From YAT only USB === Diagnostics ===<LF>RepRapFirmware for Duet 3 Mini 5+ version 3.3 (2021-06-15 21:46:11) running on Duet 3 Mini5plus WiFi
(standalone mode)<LF>Board ID: DXGUZ-U196U-D65J0-40KMN-1Y03Z-RKST9<LF>Used output buffers: 1 of 40 (12 max)<LF>=== RTOS ===<LF>Stat
ic ram: 102724<LF>Dynamic ram: 106308 of which 12 recycled<LF>Never used RAM 34660, free system stack 170 words<LF>Tasks: NETWORK
(ready,12.6%,264) HEAT(notifyWait,0.0%,307) Move(notifyWait,0.1%,338) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWai
t,0.0%,371) CanClock(delaying,0.0%,340) TMC(notifyWait,0.0%,124) MAIN(running,85.5%,426) IDLE(ready,1.0%,29) AIN(delayin
g,0.8%,273), total 100.0%<LF>Owned mutexes: WiFi(NETWORK) USB(MAIN)<LF>=== Platform ===<LF>Last reset 00:00:22 ago, cause: power
up<LF>Last software reset at 2021-10-22 16:29, reason: User, GCodes spinning, available RAM 31628, slot 2<LF>Software reset co
de 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a<LF>Error st
atus: 0x00<LF>MCU revision 3, ADC conversions started 22476, completed 22476, timed out 0, errs 0<LF>Step timer max interval 7
52<LF>MCU temperature: min 27.2, current 29.9, max 30.1<LF>Supply voltage: min 1.1, current 1.3, max 1.4, under voltage events
: 0, over voltage events: 0, power good: no<LF>Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0
/0/0, gc cycles 0<LF>Driver 0: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, w
rites 0, timeouts 0, DMA errors 0<LF>Driver 1: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifc
nt 0, reads 0, writes 0, timeouts 0, DMA errors 0<LF>Driver 2: position 0, ok, SG min/max not available, read errors 0, wri
te errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0<LF>Driver 3: position 0, ok, SG min/max not available, re
ad errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0<LF>Driver 4: position 0, ok, SG min/max n
ot available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0<LF>Driver 5: position 0,
ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0<LF>Driver
6: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA
errors 0<LF>Date/time: 2021-10-22 21:15:44<LF>Cache data hit count 44194745<LF>Slowest loop: 3.80ms; fastest: 0.11ms<LF>=== Storage
===<LF>Free file entries: 10<LF>SD card 0 detected, interface speed: 22.5MBytes/sec<LF>SD card longest read time 3.1ms, write ti
me 0.0ms, max retries 0<LF>=== Move ===<LF>DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000<LF>=== M
ainDDARing ===<LF>Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA stat
e -1<LF>=== AuxDDARing ===<LF>Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0],
CDDA state -1<LF>=== Heat ===<LF>Bed heaters = 0 -1, chamberHeaters = -1 -1<LF>=== GCodes ===<LF>Segments left: 0<LF>Movement lock held
by null<LF>HTTP is idle in state(s) 0<LF>Telnet is idle in state(s) 0<LF>File is idle in state(s) 0<LF>USB is ready with "m122" in
state(s) 0<LF>Aux is idle in state(s) 0<LF>Trigger is idle in state(s) 0<LF>Queue is idle in state(s) 0<LF>LCD is idle in state(s) 0
<LF>SBC is idle in state(s) 0<LF>Daemon is idle in state(s) 0<LF>Aux2 is idle in state(s) 0<LF>Autopause is idle in state(s) 0<LF>Code
queue is empty.<LF>=== CAN ===<LF>Messages queued 199, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync del
ay 0, free buffers 17 (min 17), ts 112/0/0<LF>Tx timeouts 0,0,111,0,0,86 last cancelled message type 30 dest 127<LF><LF>=== Netwo
rk ===<LF>Slowest loop: 10.76ms; fastest: 0.00ms<LF>Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sess
ions<LF>HTTP sessions: 1 of 8<LF>- WiFi -<LF>Network state is active<LF>WiFi module is connected to access point <LF>Failed messages: p
ending 0, notready 0, noresp 0<LF>WiFi firmware version 1.26<LF>WiFi MAC address d8:bf:c0:14:e6:36<LF>WiFi Vcc 3.31, reset reason
Power up<LF>WiFi flash size 2097152, free heap 26376<LF>WiFi IP address 192.168.50.149<LF>WiFi signal strength -51dBm, mode 802.
11n, reconnections 0, sleep mode modem<LF>Clock register 00002002<LF>Socket states: 0 0 0 0 0 0 0 0<LF>ok<LF>

@t3p3tony === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.3 (2021-06-15 21:46:11) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: DXGUZ-U196U-D65J0-40KMN-1Y03Z-RKST9
Used output buffers: 3 of 40 (13 max)
=== RTOS ===
Static ram: 102724
Dynamic ram: 106308 of which 12 recycled
Never used RAM 34660, free system stack 170 words
Tasks: NETWORK(ready,14.5%,260) HEAT(delaying,0.0%,307) Move(notifyWait,0.1%,284) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWait,0.0%,371) CanClock(delaying,0.0%,340) TMC(notifyWait,0.3%,116) MAIN(running,83.5%,426) IDLE(ready,0.8%,29) AIN(delaying,0.8%,273), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:00:30 ago, cause: power up
Last software reset at 2021-10-22 16:29, reason: User, GCodes spinning, available RAM 31628, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
MCU revision 3, ADC conversions started 30622, completed 30622, timed out 0, errs 0
Step timer max interval 1487
MCU temperature: min 24.4, current 27.8, max 27.9
Supply voltage: min 23.9, current 24.1, max 24.2, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 49600, assumed not present
Driver 1: position 0, assumed not present
Driver 2: position 0, assumed not present
Driver 3: position 0, assumed not present
Driver 4: position 0, assumed not present
Driver 5: position 0, assumed not present
Driver 6: position 0, assumed not present
Date/time: 2021-10-22 21:14:02
Cache data hit count 58840567
Slowest loop: 4.88ms; fastest: 0.11ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 3.8ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, maxWait 20640ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 8, completed moves 8, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 273, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 17 (min 17), ts 153/0/0
Tx timeouts 0,0,152,0,0,119 last cancelled message type 4514 dest 127

=== Network ===
Slowest loop: 9.93ms; fastest: 0.00ms
Responder states: HTTP(2) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8

• WiFi -
  Network state is active
  WiFi module is connected to access point
  Failed messages: pending 0, notready 0, noresp 0
  WiFi firmware version 1.26
  WiFi MAC address d8:bf:c0:14:e6:36
  WiFi Vcc 3.31, reset reason Power up
  WiFi flash size 2097152, free heap 24240
  WiFi IP address 192.168.50.149
  WiFi signal strength -45dBm, mode 802.11n, reconnections 0, sleep mode modem
  Clock register 00002002
  Socket states: 4 0 0 0 0 0 0 0

From webcontrol

I need some feedback/help and sorting out the problem so i can fix the card or possibly get a new one.

Here is the story/problem:
Card been laying in the box until the wiring and completion off whole printer, then i have connected the whole thing and programmed the code to match the setup. The setup is a 3 axis Z, with the extra drive expansion on the duet 3 mainboard.

Printer finished its first print perfectly no problem, but when i tried changing the filament i noticed the stepper motors did not respond to the commands in webconsole, neither homing. The printer works like normal, but it does not show drivers 5,4,3,2,1,0 in M122 command. I also notice that STATUS is blinking slow red. I take the card out after reading that i can flash it with usb with new firmware(3.3), double clicks reset to get into bootload after about 5 sec light disapear and when i try put new files into bootload the whole thing crashes.
I have been reading about possible CPU fault, wich is super rare. I have checked whole thing for possible burns or faults, and card looks like new. Changed both fuses to see if that helped.

I uploaded my code so you can see, but i also tried loading standard code from RRF config to see if something was faulty. Even if i start card with or without SD card the mainboard blinks red status light.

Hope to get some quick respons, and service as i would really like to use my printer after 2 months of research and wiring/putting together again.

Best regards

tpre0.g tpost0.g tfree0.g stop.g sleep.g retractprobe.g resurrect.g resume.g pause.g homez.g homey.g homex.g homeall.g deployprobe.g config.g bed.g

https://forum.duet3d.com/topic/20333/bltouch-oddity/10?_=1613996928642

Please read this. I have finally found the problem.

It was not the cable after all but the Z min pin on the bl touch had come loose. Check the bltouch, i have original one yet i feel they are really cheaply made. The soldering had come loose on the pin on the z min on the probe(constantly giving me reading errors, red lights and z-probe 1000 red error reading

@TampaPrinter I have not corrected my fault yet, since i have to dissasemble my extruder. I belive the problem lays in the pins (dupont) connection to the bltouch as they are not thight enough