set stepper motor Amp only for extruder

ICY_SNAKE

Hello

got the new bontech LGX extruder.

The label says 5.5V and max 0.7A

Where can i set the value only for the extruder 1 and 2?

Thx
Dieter

jay_s_uk

@icy_snake ignore the voltage, you set the current only/ rule of thumb is 80% of maximum, so 560mA.
Set this in M906

ICY_SNAKE

so here i will set:

 M906 X1800.00 Y1800.00 E560.00:560.00 I40 				; Set motor currents (mA) and motor idle factor in per cent

Ok yes.

Thx
Dieter