Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    How to be able to reach DWC from outside homenetwork

    Scheduled Pinned Locked Moved
    Duet Web Control
    3
    5
    355
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Topengaundefined
      Topenga
      last edited by

      Hi guys,

      May somebody tell me how to set the DWC or rather how to realise the DWC reachable secured from outside the own home network?

      Many thanks

      Dan

      o_lampeundefined markzundefined 2 Replies Last reply Reply Quote 0
      • o_lampeundefined
        o_lampe @Topenga
        last edited by

        @topenga
        VPN comes to my mind (Virtual Private Network). With an SBC, there are similar tools (SAMBA?), but I haven't tried it myself.

        Do you really want to control the printer or just check? Maybe an IP-Camera would be better suited then?

        1 Reply Last reply Reply Quote 0
        • Topengaundefined
          Topenga
          last edited by

          @o_lampe,

          Many thanks for your replay.
          O.k. VPN does that mean that I have to buy software to be able "tunnel" my data through the www?
          What about speed? Is there any significant performance lose?
          To to your question:
          Honestly it makes just sence to observe the print process trough the cam and maybe start a print and stop the process when problems occures.

          I guess that just that will be necessary

          Many thanks in advance

          1 Reply Last reply Reply Quote 0
          • markzundefined
            markz @Topenga
            last edited by

            @topenga The usual approach is to alter your firewall/router so that the DWC port is forwarded to the outside world as a different port.

            1. Find out your home network public IP address by going to Whatsmyip.com or similar web sites. This may randomly change depending on your provider.

            2. Forward port 80 of the DWC to port ? (say 8324) of the home network. - this is a security concern so I'd unforward it when you're finished

            3. You may need to enable CORS on the DWC -- M586 C"*"

            4. From outside, browse to my-public-ip:8324

            Topengaundefined 1 Reply Last reply Reply Quote 0
            • Topengaundefined
              Topenga @markz
              last edited by

              @markz many thanks for that suggestion/information. Will try that as well how to easy and fast after ending observation of the printer to ensure the port again.

              Will let you inform how it works

              Many thanks

              Dan

              1 Reply Last reply Reply Quote 1
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA