Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Delta G28 issue

    Scheduled Pinned Locked Moved
    3D Printing General Chat
    2
    3
    120
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • tecnoundefined
      tecno
      last edited by

      G28 works OK at start of file but at end of file G28 only left and back stand motors are working.
      Can it be that M84 is activated way to fast. If I stop print same issue occurs when issuing G28 only 2 of 3 motors are working, the motor on right stand is not. This is gcode from Simplify3D.

      G1 X-18.159 Y-15.782 E30.1107
      G92 E0.0000
      G1 E-6.5000 F2400
      ; layer end
      G28 ; home all axis
      M104 S0 ; turn off extruder
      M140 S0 ; turn off bed
      M84 ; disable motors

      blt3dpundefined 1 Reply Last reply Reply Quote 0
      • blt3dpundefined
        blt3dp @tecno
        last edited by blt3dp

        @tecno I wonder if adding M400 after your G28 there would help

        My 3D Printing YouTube Channel
        Better Living Through 3D Printing

        Follow me on Instagram and Twitter
        Instagram
        Twitter

        tecnoundefined 1 Reply Last reply Reply Quote 0
        • tecnoundefined
          tecno @blt3dp
          last edited by

          @blt3dp

          Will try that tomorrow, thank you.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA