Smart Effector v2 fan connector on-board

[blt3dp]

@dc42 @T3P3Tony or anyone have the part # for the 2-pin fan connector that's on board? I'm needing to replace mine.

[tecno]

@blt3dp
The power connector (Input 1) is a 2 x 3 pin black Molex Microfit 3 connector

https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector

[dc42]

@blt3dp do you mean the black 2-pin Microfit connector for the hot end cooling fan, or the white Molex KK connector for the print cooling fan?

[blt3dp]

@dc42 Sorry, I was looking for the print cooling fan connector. The latching board mount connector for the white Molex kk connector.

I'm thinking this one would be it right?
https://www.digikey.com/en/products/detail/molex/0022232021/26667?s=N4IgTCBcDa5gtGAzIgDGAjCAugXyA

[dc42]

@blt3dp yes that one is suitable. They are also widely available on eBay. The one we use is a compatible connector made by Wurth Electronics.