Update 1HCL firmware from SBC

[HighFreq]

How do i update 1HCL firmware from a SBC running Duet3?

Also the main board still shows old firmware on the status message even after running apt update/upgrade.

[chrishamm]

@highfreq Use the standard apt update/apt upgrade method, see here. In SBC mode you should never attempt to update anything by uploading files on the web interface.

PS: If it displays the wrong firmware even after the reprapfirmware has been updated, try reinstalling it by running sudo apt install --reinstall reprapfirmware. Or just use M997/M997 Bnnn where nnn is the CAN address of the 1HCL.

[HighFreq]

@chrishamm it worked!! thanks.