Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Wifi module idle

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    6
    40
    2.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A Former User?
      A Former User @tkdirp
      last edited by

      @tkdirp said in Wifi module idle:

      dos not seem to have any significant effect

      thats okay, was primarily after the ouput that say WiFi: ../src/Sock <...> found network U+Net48C4.

      Either the + is a problem or there is some sort of interoperability issue with the router.

      I would suggest checking the encyption type, or change it to WPA(2)/TKIP, changing the SSID and Passphrase to something without special charters.

      Or optionally use M589 to set up the duet as an access point.

      But first, repeat https://forum.duet3d.com/post/164593 as I had made a typo in the command to clear the wifi settings. (However as you did get an OK at some point i doubt it'll make a difference)

      1 Reply Last reply Reply Quote 1
      • A Former User?
        A Former User
        last edited by

        forgot the link to M589 to try AP mode
        https://duet3d.dozuki.com/Wiki/Gcode#Section_M589_Configure_access_point_parameters

        tkdirpundefined 1 Reply Last reply Reply Quote 0
        • tkdirpundefined
          tkdirp @A Former User
          last edited by

          @bearer
          Thank you so much
          Screen Shot 2020-07-04 at 10.07.56 PM.png

          1 Reply Last reply Reply Quote 0
          • A Former User?
            A Former User
            last edited by

            which bit helped? correcting to M558 or are you using the Duet as an access point?

            tkdirpundefined 1 Reply Last reply Reply Quote 0
            • tkdirpundefined
              tkdirp @A Former User
              last edited by

              @bearer
              I just changed the name of the wifi I guess the "+" in the SSID name was the issue

              A Former User? Natuserundefined 2 Replies Last reply Reply Quote 1
              • A Former User?
                A Former User @tkdirp
                last edited by

                @tkdirp said in Wifi module idle:

                I guess the "+" in the SSID name was the issue

                interesting feedback, perhaps something should be tested and added to the documentation.

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  There is no hard rule for SSID special character support on the router side. Some will let you use pretty much anything, but in general it's probably best to avoid special characters in the SSID.

                  I'll add a note to the M587 command regarding that.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • dc42undefined
                    dc42 administrators
                    last edited by

                    The WiFi firmware uses an API call provided by Expressiv (the WiFi chip manufacturer) to set the SSID. Unfortunately, the documentation provided by Expressiv is far from complete. It doesn't specify which characters it allows in an SSID. So your guess is as good as mine!

                    Duet WiFi hardware designer and firmware engineer
                    Please do not ask me for Duet support via PM or email, use the forum
                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                    1 Reply Last reply Reply Quote 0
                    • Natuserundefined
                      Natuser @tkdirp
                      last edited by

                      @tkdirp How to change it? Sorry, but I'm a beginner and I have similar problem

                      Phaedruxundefined 1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator @Natuser
                        last edited by

                        @natuser said in Wifi module idle:

                        @tkdirp How to change it? Sorry, but I'm a beginner and I have similar problem

                        This thread is 2 years old. It would be best if you started a new thread with your issue. Give as much detail about your situation as possible. Thanks.

                        Z-Bot CoreXY Build | Thingiverse Profile

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA