Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Suppress driver warning message

    Scheduled Pinned Locked Moved Solved
    General Discussion
    2
    3
    230
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • CR3Dundefined
      CR3D
      last edited by

      Dear Community and @dc42 ,

      we have installed a special print head for which we do not tap all four pins of the motor connector. All you have to do is rub off 2 phases and the integrated servo driver of the print head recognizes the speed and position to be driven. The problem here is that we are of course entitled to receive the driver error message. This in turn blocks our console in the long run and thus blocks the host when sending commands via USB. We are currently using firmware 3.4.1.

      PXL_20220802_125631635.jpg

      So my question is, how is it possible to display the message only once and then not further?
      Disabling the driver is of course not an option.

      Thanks for your help

      Christian from CR-3D
      Homepage:
      www.cr-3d.de

      Facebook:
      https://www.facebook.com/cr3d.official

      Our Discord Server
      https://discord.gg/SxRaPNuRdA

      Thingiverse Profile:
      https://www.thingiverse.com/cr-3d_official/about

      dc42undefined 1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators @CR3D
        last edited by

        @cr3d if you set the motor current to less than 500mA then the message should be suppressed.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        CR3Dundefined 1 Reply Last reply Reply Quote 0
        • CR3Dundefined
          CR3D @dc42
          last edited by

          @dc42 Thank you!

          It worked 🙂

          Christian from CR-3D
          Homepage:
          www.cr-3d.de

          Facebook:
          https://www.facebook.com/cr3d.official

          Our Discord Server
          https://discord.gg/SxRaPNuRdA

          Thingiverse Profile:
          https://www.thingiverse.com/cr-3d_official/about

          1 Reply Last reply Reply Quote 0
          • dc42undefined dc42 marked this topic as a question
          • dc42undefined dc42 has marked this topic as solved
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA