Motor don't stop to home
-
Hi,
I changed my nema motors, and they no longer stop in home, yet the endstop LEDs go out when they are in possition
Motor wiring problem? -
Please give us some more detailed information about your setup.
https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help
-
@phaedrux sorry, I have a delta 'predator' with. a duet 2 wifi, with my previous motors I had no problem, one of my motors blocked, so I wanted to change the 3, I think it can only become connections and I don't know which reversed wire I connected well in the order of the technical doc but with Chinese as they have not changed the order of the wires
-
You can use this guide to find the motor phase pairs
And any time you have issues with a delta, it's good to go over the basic calibration steps.
https://docs.duet3d.com/en/User_manual/Tuning/Delta_calibration
