RFF 3.42 extruder change

paolozampini1973

@dc42 @Phaedrux my two extruder printer when i go to print and i have to change from extruder 1 to extruder 2 the printer stops for about 10 seconds sometimes even 30 seconds i can't understand why ?
PAUSE.gcode
console (5).txt
config (44).g

jay_s_uk

@paolozampini1973 depends whats in your tool change files.
tpre, tpost and tfree.
theres probably some wait for temps to be reached

paolozampini1973

@jay_s_uk said in RFF 3.42 extruder change:

@paolozampini1973 depends whats in your tool change files.
tpre, tpost and tfree.
theres probably some wait for temps to be reached

No I speak that the temperatures are identical for both extruders

jay_s_uk

@paolozampini1973 well it could be something else but without providing the tool change files its impossible to tell

paolozampini1973

@jay_s_uk said in RFF 3.42 extruder change:

@paolozampini1973 well it could be something else but without providing the tool change files its impossible to tell

PAUSE.gcode
you meant the print file I attached it to you

jay_s_uk

@paolozampini1973 no, the toolchange files
tpre, tpost and tfree

paolozampini1973

@jay_s_uk said in RFF 3.42 extruder change:

@paolozampini1973 no, the toolchange files
tpre, tpost and tfree

a moment and I'll send it to you and it won't let me attach the zip file

paolozampini1973

@paolozampini1973 said in RFF 3.42 extruder change:

@jay_s_uk said in RFF 3.42 extruder change:

@paolozampini1973 no, the toolchange files
tpre, tpost and tfree

a moment and I'll send it to you and it won't let me attach the zip file

tfree0.g tfree1.g tfree2.g tfree3.g tpost0.g tpost1.g tpost2.g tpost3.g tpre0.g tpre1.g tpre2.g tpre3.g

paolozampini1973

@jay_s_uk toolchange NO HAVE

jay_s_uk

@paolozampini1973 you have more than 1 tool defined though. you don't need to have a physical toolchange to have different tools

jay_s_uk

@paolozampini1973 you M116 p0 and M116 P1 in your tpost files so that will wait for any temps to be reached

paolozampini1973

@jay_s_uk said in RFF 3.42 extruder change:

@paolozampini1973 you have more than 1 tool defined though. you don't need to have a physical toolchange to have different tools

So what do you think I should do delete them?