Hotend temp decrease during G29 and G32

[tecno]

Above shows start of G29 and end where temp raises to set temperature. Bed heater ON.

What is this? My Delta printer with Effector.

Disturbance in the force??

[tecno]

Heater turns off when Z goes down from dive height, and is on during travel moves.

[Phaedrux]

You probably have M558 B parameter set to turn off the heater during the probing move.

Bn If 1, turn off all heaters while probing, default (B0) leaves heaters on.

Useful if your probe is susceptible to interference from the heater.

[tecno]

@Phaedrux

Correct, it has been a standstill for 2 months due to shipping damage of my new (600x600) magnetic PEI surface from China but got issue solved by Paypal.

Forgot about B parameter I played with with the glass bed.