Input Shaping for different tools

[Velvia]

Can I run separate input shapers for different tool heads? For example M593 P"zvddd" F47 for T0 and M593 P"mzv" F42 for T1, if I put them under each specific tool in the config file?

[Phaedrux]

You could probably load the shaper profile in the tool change files.

[Exerqtor]

Or in daemon.g with some conditional code.

[dc42]

@Velvia as @Phaedrux suggested, use the tool change files. You can put the M593 command in the tpost#.g file.