G32 2 z-Axis Issues
-
After rewiring all components, I have an interesting problem, which opens up after triggering the G32 6 times. Before that, the difference became smaller and smaller. Now the distance of the real axis increases to the unbearable.
Any hints here?
-
@DK4YA
Check if you have swaped the connectors of the z-drives.
Maybe the correction is made at the wrong side. -
@DIY-O-Sphere excellent solution. Thanks.
-
undefined T3P3Tony marked this topic as a question
-
undefined T3P3Tony has marked this topic as solved
