Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Automatic turn off

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    235
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • mendeleviumundefined
      mendelevium
      last edited by

      I have a 3d printer in which I wish to turn off power automatically.. There are various posts but they are a minefield and I do not wish to damage anything... My machine has a contactor which is switched on, has a latching coil and switched off by interrupting this coils supply.
      I use also simplify 3d in which I can place an M code in its end scripts to effectively activate an electronic relay to interrupt the contactor coil.
      I need to know if I can use the P S on terminal and what else? Do I need to place anything in my config?
      I appreciate someone guide me in this.
      Many thanks in advance,

      mendeleviumundefined 1 Reply Last reply Reply Quote 0
      • mendeleviumundefined
        mendelevium @mendelevium
        last edited by

        @mendelevium
        My apologies posted twice as I could not find my original post and thought I did not post... sorry...

        T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
        • T3P3Tonyundefined
          T3P3Tony administrators @mendelevium
          last edited by

          @mendelevium no worries i will lock this thread as the discussion is here:

          https://forum.duet3d.com/topic/31678/powering-off-duet-wifi-via-an-m-code/5

          www.duet3d.com

          1 Reply Last reply Reply Quote 0
          • T3P3Tonyundefined T3P3Tony locked this topic
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA