Picking an SSR or a MOSFET

[Snippy]

Was looking at a DC100D40 SENSATA / CRYDOM, considering the price is it worth it?
What about MOSFETs any tips on what to pick.

Running a ~400w 24v bed on a duet 6HC.

[Phaedrux]

Check the Auber Industries DC-DC SSR listed here https://docs.duet3d.com/en/User_manual/Connecting_hardware/Heaters_bed#bed-heater-driven-using-a-solid-state-relay

[Snippy]

@Phaedrux
Thanks.
It comes to around same price, shipping starts at 90€

[Dad003]

@Snippy this is what i run on my printer , they have been reliable so far .

https://www.auberins.com/index.php?main_page=product_info&cPath=2_30&products_id=674

[A Former User]

This post is deleted!