Motedis 2020 i-type drop in t-nuts
-
I followed dc42's build guide for kossel build, and got 2020 i-type extrusions from Motedis.
I ordered t-nuts (m3,m4 and m5) from Robotdigg, but it seems they dont fit the Motedis extrusions.
Where can I find t-nuts that work?-Jannis
-
-
http://www.motedis.se/shop/table_cats.php?table_id=19&layer=232
No other place to get them?
Motedis do not ship to Norway, so I had to get it shipped to a different country, and pick it up there.
It was ok for the extrusions, due to the huge save in cost, but the t-nuts will be pretty expensive unless I can get them elsewhere.-Jannis
-
These should work too, but the can be a pain sometimes since there is no spring on them
-
-
Thanks!
-J
-
These should work too, but the can be a pain sometimes since there is no spring on them
These are the ones I got that's for B-type and not I-type.
B-type = 6mm, I-type = 5mm.
Eg. they wont turn in the slot unfortunately-J
-
I followed dc42's build guide for kossel build, and got 2020 i-type extrusions from Motedis.
I ordered t-nuts (m3,m4 and m5) from Robotdigg, but it seems they dont fit the Motedis extrusions.
Where can I find t-nuts that work?-Jannis
If you have access to a 3d printer you could print your own t nuts. There are various types on thingiverse.
-
If you have anything but 6mm t slots, give up. I could never find anything either. Why it is even made, I don't know. Even the company in the states (8020.com) doesn't list any for their own extrusions.
-
The nuts in this listing https://www.ebay.co.uk/itm/M3-M8-Steel-ball-T-Slot-Nuts-Aluminum-Accessories-For-20X20-30-40-45-Series/112320385722?hash=item1a26d112ba
m38cKecNc9nTnsZvvf6qREg look the same as the Motedis ones. But what you really need to know is the slot width that they are designed for.I have some Motedis nuts left over, but probably not as many as you need.
