Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    PID Dont stop forever..

    Scheduled Pinned Locked Moved
    General Discussion
    4
    6
    120
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Melacko3004undefined
      Melacko3004
      last edited by

      Ji i just did pid to the bad and the its just going up and down for 30 minuts now and still...
      whats the problem ?

      Melacko3004undefined 1 Reply Last reply Reply Quote 0
      • Melacko3004undefined
        Melacko3004 @Melacko3004
        last edited by

        @Melacko3004 Its just right now stoped...
        and its says :

        Warning: heater behaviour was not consistent during tuning
        Auto tuning heater 0 completed after 4 idle and 25 tuning cycles in 2407 seconds. This heater needs the following M307 command:
        M307 H0 R0.486 K0.846:0.000 D3.51 E1.35 S1.00 B0
        Send M500 to save this command in config-override.g

        ?????

        jay_s_ukundefined infiniteloopundefined 2 Replies Last reply Reply Quote 0
        • jay_s_ukundefined
          jay_s_uk @Melacko3004
          last edited by

          @Melacko3004 just save it and carry on. it "should" be ok

          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

          1 Reply Last reply Reply Quote 0
          • infiniteloopundefined
            infiniteloop @Melacko3004
            last edited by

            @Melacko3004 said in PID Dont stop forever..:

            ?????

            Duet is well documented. "Making new heater parameters persistent" describes two options how to store the tuning results.

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              What size is the bed? How powerful is the heater? Where is the thermistor placed?

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              • Melacko3004undefined
                Melacko3004
                last edited by

                OK Thank you 🙂

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA