SBC Not updating to 3.5 beta 4.

[IndeX4D]

hello,
I wanted to update via sbc like everytime. Now, updating has not finished.
I have still 3.5 beta 3, which is a problem cause of the extruding bug.

MY other printer with same setup had no problems....
may somebody could give me a helpful advice.

thanks

[Phaedrux]

Can you try swapping back to the stable branch

https://docs.duet3d.com/en/User_manual/Machine_configuration/DSF_RPi#switch-to-stable-packages

and then change to the test branch again?

https://docs.duet3d.com/en/User_manual/Machine_configuration/DSF_RPi#switch-to-unstable-packages

[IndeX4D]

@Phaedrux

yes, was working!!!
thank you