WIFI CONECTION

[Polo]

Hi all

I recently change my router and had to reconnect my board duet3 mini WIFI. But I see I'm loosing connection. it goes back in forth. I didn't have this problem until I changer my router. Any ideas why ??

[droftarts]

@Polo what is your make and model of your router? Please post a full M122 output from your Duet board. Also see https://docs.duet3d.com/en/User_manual/Troubleshooting/WiFi_troubleshooting

Ian

[Polo]

@droftarts

Hi

here is the model of my modem !!!
BGW320-505

Thanks

code_text
```7/2/2023, 3:25:15 AM	Connection established
7/2/2023, 3:25:15 AM	Connection interrupted, attempting to reconnect...
Network error
7/2/2023, 3:23:31 AM	Connection established
7/2/2023, 3:23:31 AM	Connection interrupted, attempting to reconnect...
Network error
7/2/2023, 3:23:23 AM	Connection established
7/2/2023, 3:23:23 AM	Connection interrupted, attempting to reconnect...
Network error
7/2/2023, 3:21:23 AM	m122
=== Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.4.5 (2022-11-30 19:41:16) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: 5PQ93-S296U-D65J0-40KMG-1A03Z-7DGLP
Used output buffers: 1 of 40 (33 max)
=== RTOS ===
Static ram: 103652
Dynamic ram: 110472 of which 60 recycled
Never used RAM 23808, free system stack 118 words
Tasks: NETWORK(notifyWait,15.1%,197) HEAT(notifyWait,0.0%,320) Move(notifyWait,0.4%,265) CanReceiv(notifyWait,0.0%,942) CanSender(notifyWait,0.0%,326) CanClock(delaying,0.0%,333) TMC(notifyWait,1.2%,72) MAIN(running,82.1%,417) IDLE(ready,0.2%,30) AIN(delaying,0.9%,263), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 10:21:58 ago, cause: power up
Last software reset at 2023-07-01 05:38, reason: User, GCodes spinning, available RAM 27360, slot 0
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
MCU revision 3, ADC conversions started 37320849, completed 37320848, timed out 0, errs 0
Step timer max interval 1479
MCU temperature: min 44.2, current 50.1, max 50.6
Supply voltage: min 26.9, current 27.1, max 27.1, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/496/496, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 0, ifcnt 36, reads 40096, writes 5, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 0, ifcnt 36, reads 40096, writes 5, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 0, ifcnt 36, reads 40097, writes 5, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 0, read errors 0, write errors 0, ifcnt 30, reads 40099, writes 2, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 0, read errors 0, write errors 0, ifcnt 30, reads 40099, writes 2, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 0, ifcnt 22, reads 40099, writes 2, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 0, ifcnt 9, reads 40101, writes 0, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2023-07-02 03:21:22
Cache data hit count 4294967295
Slowest loop: 787.14ms; fastest: 0.08ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 5.8ms, write time 111.0ms, max retries 0
=== Move ===
DMs created 83, segments created 36, maxWait 202027ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 567, completed 567, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 9], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== CAN ===
Messages queued 3971, received 0, lost 0, boc 0
Longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 18 (min 18), ts 2206/0/0
Tx timeouts 0,0,2206,0,0,1765 last cancelled message type 4514 dest 127
=== Network ===
Slowest loop: 532.25ms; fastest: 0.06ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 1 of 8
= WiFi =
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 4
WiFi firmware version 1.27
WiFi MAC address d8:bf:c0:14:e8:37
WiFi Vcc 3.38, reset reason Power up
WiFi flash size 2097152, free heap 23424
WiFi IP address 192.168.1.118
WiFi signal strength -41dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
7/2/2023, 3:21:09 AM	M0
Cancelled printing file 0:/gcodes/First layer calibration_0.3mm_PLA_3m.gcode, print time was 0h 2m
7/2/2023, 3:21:08 AM	M25
Resume state saved
Warning: Macro file pause.g not found
Printing paused at X28.3 Y42.0 Z0.2