Panel Due 5i Multiple Fan on the screen

selva_tvi

Hi,

Using Panel Due 5i with Duet 6HC with SBC.

Configured for IDEX.

In Laptop, with DWC we will be able to control all the 4 fans (Two hotend and two part cooling).

In the Panel Due, we can see only one Fan, that is the current tools Part cooling fan.

Is there any way to show it on the main screen of Panel Due?

Thanks

Phaedrux

What firmware version on the Duet and the PanelDue?

You may wish to setup a set of fan control macros and place them in the macros folder. That would allow you to send fan controls to your additional fans.

selva_tvi

@Phaedrux Board -

Duet 3 MB 6HC V1.02 with RPI 3B.
DSF Version: 3.4.5
Firmware: RepRapFirmware for Duet 3 MB6HC 3.4.5 (2022-11-30)
Duet Web Control 3.4.5

Panel Due 5i - Firmware - 3.4.x

I needed the fan control in the front screen. Is it possible?

Also, if I connect the Pen drive (USB drive) to SBC, how to show in Panel due (It is showing in DWC).

When i clicked the Print icon, it is showing the Sd card option only. It is showing two partitions - one is gcodes and other is firmware files folder