Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Question: Cannot connect via DWC while print is paused (Duet 2)

    Scheduled Pinned Locked Moved Unsolved
    General Discussion
    3
    8
    352
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • wieman01undefined
      wieman01
      last edited by wieman01

      Hello,

      We face a strange issue whenever we pause one of the prints or when the printer pauses having run out of filament. As soon as we reset the machine or press "Continue" the wifi connection works fine.

      We run the firmware version 3.4.5 on a Duet 2 with an external antenna.

      Is that by design or am I missing something?

      dc42undefined 1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Are you able to ping the Duet IP address when the print is paused?

        Z-Bot CoreXY Build | Thingiverse Profile

        wieman01undefined 1 Reply Last reply Reply Quote 1
        • wieman01undefined
          wieman01 @Phaedrux
          last edited by

          @Phaedrux

          Yes, I can ping the Duet's ip address, I get a response. DWC also tries to connect, but the connection drops constantly.

          1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @wieman01
            last edited by

            @wieman01 please share the contents of your pause.g file.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            wieman01undefined 1 Reply Last reply Reply Quote 1
            • wieman01undefined
              wieman01 @dc42
              last edited by

              @dc42 said in Question: Cannot connect via DWC while print is paused (Duet 2):

              @wieman01 please share the contents of your pause.g file.

              Thank you. These are the contents:

              G91            			; relative positioning
              G1 Z20 F360     		; lift Z by 10mm
              

              When I checked the file I noticed I had filed the contents under "Pause.g" with a capital letter. I changed it to "pause.g" and ta-da... I can connect with no problems.

              So sorry for having bothered you, but apparently this discussion was necessary. 😊

              Thank you both!

              dc42undefined 1 Reply Last reply Reply Quote 1
              • dc42undefined
                dc42 administrators @wieman01
                last edited by

                @wieman01 I'm guessing that you are running a Duet with attached SBC ?

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                wieman01undefined 2 Replies Last reply Reply Quote 1
                • wieman01undefined
                  wieman01 @dc42
                  last edited by wieman01

                  @dc42 said in Question: Cannot connect via DWC while print is paused (Duet 2):

                  @wieman01 I'm guessing that you are running a Duet with attached SBC ?

                  I am running 7 Duet 2's in combination with Duex 5's on 24V. No SBC attached. May I ask why you would ask?

                  The setup is perfect for us, however, next year we'll get a few Duet 3's to see how we can further scale our printers.

                  1 Reply Last reply Reply Quote 0
                  • wieman01undefined
                    wieman01 @dc42
                    last edited by

                    @dc42

                    I just noticed that the issues has returned. I was a little premature in hoping the issue had gone... I renamed "Pause.g" to "pause.g" but to no avail it appears.

                    Any other clue that would come to your mind?

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined Phaedrux marked this topic as a question
                    • First post
                      Last post
                    Unless otherwise noted, all forum content is licensed under CC-BY-SA